[tp widget="default/tpw_default.php"]

Author: admin

how to use trickle charger on motorcycle

Uncategorized

, , , ,

Now that the battery is disconnected,you can begin charging it using the trickle charger.First,connect the positive lead of the charger to the positive terminal of the battery.Then,connect the negative lead of the charger to a metal ground on the motorcycle frame.It is important to not let the leads touch each other,as this can cause a spark.Now,you can plug in the charger and turn it on.More items

Does a trickle charger really work?

Yes. A trickle charger provides a low current to the battery for slow charging. If it does not have a built-in automatic cutoff, it will continue to provide the current even when the battery is fully charged. What is the purpose of a float charger?

When to use trickle charger?

Three Types of Battery ChargersTrickle Charger s. A trickle charger is a kind of battery charger,but it is also a method to charge a battery. …Smart Battery Chargers. These chargers are made to charge batteries as quickly and safely as possible. …Jump Starters or Jump Boxes. These devices are very useful and practical to be used in emergency situations. …

What is the best battery charger for a motorcycle?

Best Motorcycle Battery Trickle Charger. Suuwer automatic trickle battery charger 6v and 12v. A trickle charger is constantly working and slowly trickling a small charge into the battery, even when it’s fully charged. US 12V 2A/6A Car Motorcycle Smart Automatic Maintainer from www.kisips.agh.edu.pl.

Will a trickle charger charge a dead battery?

The main goal of a trickle charger is to ensure to keep running a battery when not in use for a long period of time, even when it is self-discharging. However, it can bring life to a dead battery providing that it is in good condition and not thoroughly worn out. So, a trickle charger definitely can charge a dead battery.

How to fix a motorcycle battery?

Solve most of your problems by adding a trickle charger to your battery. This setup offers reliable power over time. 1. Take a Close Look First. Before you attach any power to a motorcycle battery, examine its outside housing. Look for signs of physical decline, such as: Cracks. Bulges. Leaking areas.

How to connect a battery charger to a battery?

Plug the charger into an outlet. Observe the setup. The battery and charger should instantly connect and show the current values. Power is now trickling into the battery.

What happens if you have a surge while charging?

If any surges occur during your charging session, the electrical energy flows right to ground. Battery damage and other issues might prevail if there’s an improper ground or none at all.

Why does it matter which cable to connect to the charger?

Because there’s no power attached to the charger, it doesn’t matter which cables should be connected first. Be sure to match the red or positive cable to the battery’s positive terminal and vice versa. These connections do matter once the charger has power.

Can you take a motorcycle battery off before trickling charging?

Remove the Battery From the Bike. Your battery takes a charge from the motorcycle’s electrical system, so it would make sense to trickle charge in the same manner. Most experts agree that removing the battery before trickle charging is the safest scenario.

Can you use a trickle charger on a motorcycle?

How to Use a Trickle Charger on Your Motorcycle Battery. You may not ride your motorcycle every day – maybe it’s more of a leisure vehicle for the weekends. This luxury works well for you, but the motorcycle battery may not agree. Hopping onto your bike one day might result in a disappointing morning with no power.

Can a bike battery be damaged?

Although it’s a rare occurrence, any electrical surges produced during the charging period can damage associated components. Printed circuit boards and sensors in modern bikes are expensive to replace in these cases. Err on the side of caution, and remove the battery.

What is a trickle charger?

A trickle charger, also sometimes referred to as a “Battery Tender” although that is actually just the most well known brand, is an item every motorcycle owner should have. Every time you park your bike in the garage, you should attach it to the trickle charger.

Do you need a trickle charger for a used bike?

This means that even if you’ve been out cruising on the highway at high RPMS, when you roll back into the garage, the battery may not be fully charged. All the more reason you need a trickle charger to top it up every time you come back.

Is an alternator better than a motorcycle?

Also generally the alternator is a lot better sized to properly charge it when it is used. At the end of the day, most people probably use their car a lot more than there motorcycle, giving it more chances to recharge.

Do motorcycles recharge their batteries?

Older and more budget friendly motorcycles often don’t do a great job recharging their batteries. While more and more newer feature correctly sized alternators on their bikes to support the accessory needs of the modern rider, many are still alternator deficient.

What is a trickle charger?

A trickle charger is essentially a slow battery charger that keeps the battery topped up at its discharge rate so that you can set off in the spring safe in the knowledge that your battery isn’t unexpectedly going to let you down. Experts at Bikesure, the specialist motorcycle insurance arm of Adrian Flux insurance, …

Can you use a trickle charger on a motorbike?

The battery is one element that needs regular attention and if it is left to completely discharge while the bike is in storage it won’t charge up as effectively …

Can a Wemco ring charger be left plugged in?

Wemco’s Ring RSCX1 Intelligent charger can be left plugged in for long periods of time which makes it attractive to those who might live a little distance from where they store their bike. Or for those who just can’t be bothered to walk to the shed or garage in the cold weather.

Can a bike battery be left in storage?

The battery is one element that needs regular attention and if it is left to completely discharge while the bike is in storage it won’t charge up as effectively when you are ready to hit the road again.

How Often Do You Need To Charge a Motorcycle Battery?

Keeping your motorcycle charged will come down to how often you use it. For those who ride on a daily or even weekly basis, your motorcycle’s battery should stay charged until its manufacturer-detailed lifespan ends.

What to do if your motorcycle doesn’t start?

If the engine doesn’t start, keep the other motorcycle running for a few more minutes and try again. Remove the clamps in reverse order; black clamp from the grounded surface, black clamp from the good battery’s negative post, red clamp from the dead battery, red clamp from the good battery. Depositphotos.

How long does it take for a rickle charger to charge?

In an effort to prevent overloading the dead battery, rickle chargers take a few hours to a full day to charge. Wait for the recommended period of time on the box. Remove the clamps in reverse order; black clamp from the grounded surface, red clamp from the dead battery, then start the motorcycle.

How to use a trickle charger on a motorcycle?

Using a trickle charger is similar to using a jump-starter, it just takes a little longer for the charge to rebuild. Remove the motorcycle’s seat to access the battery. Make sure your trickle-charger isn’t plugged into the outlet. Connect the red clamp to the positive post of the dead battery.

What to do if your motorcycle battery is dead?

If the dead-battery motorcycle doesn’t start after a few attempts, try reconnecting the battery cables, as they may just be loose.

How to avoid sparks on battery terminals?

Attaching cable clamps to the battery terminals in a single motion will avoid sparks.

What clamp to attach to motorcycle battery?

Attach the opposite red clamp to the live motorcycle’s battery’s positive terminal.

Can A Cold Winter Destroy A Motorcycle Battery?

There may be some of you who didn’t know that a motorcycle battery required maintenance throughout the winter and may have done nothing throughout the cold months.

What happens to a motorcycle battery in the winter?

What Happens To A Motorcycle Battery During The Winter. Just like us humans, harsh weather conditions can be rough on motorcycle batteries. Unfortunately, it is completely possible for a motorcycle battery to freeze. Cold temperatures can inhibit a motorcycle battery’s ability to start a motorcycle.

What is the difference between a trickle charger and a battery tender?

A trickle charger and a battery tender both charge motorcycle batteries, but a trickle charger is different because it gives a constant charge rather than turning on and off like a battery tender. If you use a trickle charger, you’ll need to supervise the charge to ensure it does not overcharge …

Why does my battery tender stop charging?

You essentially can let it do all the work without a worry. Some people worry that the battery tender itself may freeze in the cold temperatures and fail to charge the battery.

How to keep motorcycle battery charged in winter?

To keep a motorcycle battery charged during the winter, you can connect a battery tender to it indefinitely throughout the season, occasionally use a trickle charger while supervising it , or completely disconnect it and keep it inside a controlled temperature environment and charge it in the spring. Living in an environment that has harsh winters …

What is a battery tender?

A battery tender is a device you can hook up to your motorcycle battery indefinitely throughout the winter. It has a sensor on it that will notify the system that the battery is starting to lose it’s charge and will automatically start charging it.

Why does my motorcycle battery charge?

The battery gets a normal, routine charge every time you ride your motorcycle because of the stator. The battery is only used to start the motor cycle and the stator continues to charge the battery while the motorcycle is running

How Does a Motorcycle Battery Charger Work?

You will find the working system of most battery chargers from the manufacturer’s manual usually included in the pack.

Why do batteries get charged overnight?

However, the rate is often below the battery rating and can take up to 10 hours or more to charge. This helps to reduce the potentiality of overcharging the battery. This is perhaps the primary reason why some batteries get charged overnight. The battery maintainer comes with circuitry that is able to charge the battery at a faster rate while regulating the current to prevent overcharging. With this in place, charging time can be shortened by a few hours.

How many charging stages does a motorcycle battery have?

Most modern chargers come as microprocessor-controlled devices; hence, they can feature between three to four charging stages.

Why are float chargers useful?

Float chargers come very useful for this purpose. The ability to increase and reduce the power of this battery charger helps to ensure that the energy consumption rate is reduced to a large extent.

How many batteries can a trickle charger charge?

This feature means that you can charge all batteries at once, without necessarily compromising the level of power that it brings. At 1.25 amp s, this unit offers more than most other trickle chargers can.

What is a 4 bank 12V battery charger?

The Battery Tender 4-Bank 12V Battery Charger ranks high among motorcycle battery chargers both in quality and the level of functionality that it brings to the mix. The several features that the unit offers can be harnessed to make the charging process better.

What are the benefits of a motorcycle battery charger?

Like motorcycle disc locks, there are a number of benefits to it Here, let’s review some of the most popular benefits of battery chargers. 1. Battery Life.

WHAT IS THE BEST TRICKLE CHARGER?

A trickle charger, as its name implies, is an electrical appliance used in having trickle charging. While trickle charging is the process of charging a fully charged device to the same rate at which it can be discharged, that is, double charging.

IS BATTERY TENDER THE SAME AS TRICKLE CHARGER?

Hopefully, battery tender is different from trickle chargers, just that they are both used for motorcycles. A battery tender is a product produced by a brand that is considered the best, standard, durable and recommendable charger for motorcyclists because of its qualities.

WHAT SIZE TRICKLE CHARGER DO I NEED FOR A MOTORCYCLE?

Given you, a certain size may be detrimental to your motorcycle because the size you will be given may not be the same size expected by your motorcycle.

IS IT SAFE TO LEAVE A TRICKLE CHARGER ON ALL THE TIME?

Leaving your trickle charger on at time may be saved and at the same time may not be saved. It depends on the battery you are charging. Some batteries only need to be charged for some hours, while others charge for hours without having any bad effect on them.

CAN YOU OVERCHARGE A BATTERY WITH A TRICKLE CHARGER?

Normally, trickle chargers are made with an automated charging system that puts the charging process to an end immediately after the battery is fully charged and prevents it from overcharging.

CAN YOU START A MOTORCYCLE WITH BATTERY TENDER CONNECTED?

Maybe you forgot to charge your motorcycle’s battery during the winter period. An emergency came up which you must go out with your motorcycle and you tried starting it. Still, It failed, so you found yourself in deep thought of maybe starting the motorcycle while you have your charger connected. Clear away your doubt, and the right answer is that it can work without damaging anything in your battery. Still, it is better to have it charged before starting, and you have your way.

CAN A BATTERY TENDER RUIN A BATTERY?

A battery tender can only ruin your battery depending on your battery and the safety precautions you take while using it and buying the perfect and standard battery tender favourable to your battery.

No Comments

how to use battery tender motorcycle

Uncategorized

, , , ,

How To Use A Battery Tender?Remove the battery (if necessary) and clean it. …Connect the Quick Connect to the battery.Place the battery in the motorcycle.Leave the Quick Connect Terminal in a place that is easier to reach on your motorcycle.Now connect the Battery Tender Adapter to the Quick Connect Terminal.Plug the Battery Tender into a wall socket.Adjust the amperage or select automatic mode.More items

What is the best motorcycle battery tender?

Battery Tender 1.25A: Can charge any small 12-volt battery,such as an ATV battery or motorcycle battery,but can only maintain a charge on a car battery.Battery Tender 4A: Can both charge and maintain any 6 or 12-volt battery,up to an RV-size vehicle.Battery Tender 5A: Can charge and maintain any size 12-volt battery up to an RV-size vehicle.

What is the best battery charger for a motorcycle?

Best Motorcycle Battery Trickle Charger. Suuwer automatic trickle battery charger 6v and 12v. A trickle charger is constantly working and slowly trickling a small charge into the battery, even when it’s fully charged. US 12V 2A/6A Car Motorcycle Smart Automatic Maintainer from www.kisips.agh.edu.pl.

What motorcycle battery is best for You?

Types of motorcycle batteryStandard /Flooded. If you’ve ever bought a motorcycle battery and had to add a liquid into it,then you’ve had a ‘flooded’ battery.VRLA. These days,VRLA batteries are the most common ones used. …AGM. …Gel. …Lithium /Li-Ion /LFP. …

What is the best battery tender?

What is the best battery tender?Boxdur-S. I have decided to purchase a battery tender for my Boxster and read an earlier recommendation from a fellow forum poster about the CTEK 5.0 MXS product.Olympic Blue. I have the CTEK 7002 and use it with the cigarette lighter plug. …chester7. …dkmajm. …grasmere. …JakiChan. …Treemagnet. …Westcoaster. …JazzCatGab. …Boxdur-S. …More items…

What is a battery tender?

Battery Tenders are float chargers or maintenance chargers, which are devices that not only provide a constant supply of voltage to battery terminals but are also processor controlled, allowing them to perform tasks like not charging a defective battery, using spark-free technology for safety, and using simple green and red indicator lights to help you figure out what’s wrong.

How to maintain motorcycle reliability?

The best thing you can do to maintain your motorcycle’s reliability is to use a battery tender or trickle charger!

What is a trickle charger?

A trickle charger maintains a consistent current throughout the charging process. It has no way of knowing if the battery is fully charged or fully depleted. A battery tender is a clever idea. It will only charge the battery when it is needed.

What is Battery tender best known for?

It’s worth noting that, while Battery Tender is best known for its chargers, the company also sells a number of other accessories. These include batteries and, of course, chargers optimized for specialized applications such as Industrial, Farm and Garden, and Marine applications.

How long does a motorcycle battery last?

Battery tenders for motorcycles do not deteriorate with usage. Batteries, on the other hand, do. A motorcycle battery should last about 48 months on average. Lack of maintenance, on the other hand, may hasten the battery’s demise.

Do you need a battery tender for a motorcycle?

If you wish to keep your motorcycle for an extended period of time while still having a battery that can start your engine , a battery tender is one of the most important items you’ll need.

Can you use a battery tender in a garage?

It is safe to operate a battery tender in a closed garage, though it is not recommended. However, if you want to ensure that your battery does not spontaneously burst due to a build-up of gases, you must have some type of ventilation flowing around it. All you’ll need is a fan in this case.

Why Should You Use a Motorcycle Battery Tender?

There are two primary reasons to use a battery tender for your motorcycle – prevention of parasitic drains and prevention of sulfation build up.

What is a NOCO genius?

A smart, fully automatic switch-mode battery charger and maintainer, the NOCO Genius can safely stay connected to your bike 24/7. Offering state-of-the-art technology, the CTEK is perfect for charging smaller 12V batteries, such as those found in motorcycles.

How many milliamps does a motorcycle battery tender use?

The motorcycle battery charger will usually have a low amperage output between 750 and 1100 milliamps.

What is a junior battery tender?

Known as the “trickle charger with a brain,” the battery tender junior will fully charge your motorcycle battery and maintain it at the proper storage voltage without the damaging effects caused by most other trickle chargers.

How to counter dead battery problem?

You can counter the dead battery problem through the use of a motorcycle battery tender. The tender will recognized that the battery has been brought below its fully charged voltage and begin charging the unit until it is once again in the green. Then the tender will shut down. The battery tender will repeat this process as needed automatically.

How long does it take for a motorcycle battery to self discharge?

All lead-acid based batteries will naturally self-discharge over time. Over a span of two to three months, your motorcycle battery has the potential to self-discharge to the point where sulfation begins to build up on the internal plates. This will result in a significant loss of cracking amps and capacity.

Why does my motorcycle battery die when the ignition is off?

As motorcycles become more integrated with technology (alarm systems, GPS, diagnostics), some of these systems will continue to draw an extremely small amount of current from the battery when the ignition key is off. Over a long enough period, this will result in a dead battery.

Why is sulfation in batteries inevitable?

Sulfation in any lead-acid type battery is pretty much inevitable as the battery is charged and discharged throughout its life. Older trickle chargers had the tendency to overcharge batteries if left attached for long periods of time, which causes sulfation to develop rapidly. Modern chargers have more advanced circuitry to prevent this, and won’t impact the life of the battery in any significant way.

How to ground a car with a negative battery?

The most common is a negative ground system where you connect the positive (red) alligator clip to the positive (or +) battery post, then connect the negative (black) alligator clip to the vehicle chassis. You should not connect to the carburetor, fuel lines, or thin sheet metal parts, but rather a heavier gauge metal part of the frame to insure the best connection and grounding. Then connect the AC power plug to the outlet. For the less common positive grounded systems you would connect the negative (- or black) alligator clip to the negative post first, connect the positive (red or +) to the vehicle’s chassis, then plug the AC power in last.

How to keep battery healthy on motorcycle?

Of course, the best way to keep your batteries healthy for a long time is to ride your motorcycle as frequently as possible.

Do you need a battery tender for a bike?

You’ll need a battery tender any time you find your bike going “click click click” when attempting to start it up like my Morphous did. If you use the Battery Tender Junior and keep it hooked up on a regular basis, it can save your electrical system as it keeps a steady current to the bike but in a very gentle way. I used it to not only get my scooter back up, but also on my 2003 Honda VTX1300S, and for good measure trickled my 1969 VW sandrail custom buggy, too. No matter if it’s a scooter, motorcycle, lawn mower, or even a tractor, if it has a battery, sooner or later its gonna need some extra juice, especially with winter right around the corner.

What Is A Battery Tender??

What separates battery tenders from plain ol’ chargers is that these devices provide a constant voltage supply but also are controlled by processors. In other words, they are able to refrain from charging faulty batteries, use spark-free technology, and have green and red indicators that help you understand what’s happening in just a glimpse.

What is a diehard battery charger?

For example, the DieHard Battery Charger/Maintainer is similar to a Battery Tender that employs things like Float Mode Monitoring to charge more than just motorcycles. Whichever model you choose, just make sure they have features like auto-adjust amperage to help maintain the charge, easy-to-read indicator lights, and float mode monitoring.

What is a trickle charger?

Trickle chargers bring dead batteries back to life while battery tenders prevent batteries from losing power during periods of inactivity. Whether you use your bike every other day or less frequently, a battery tender will preserve the life of the battery to ensure your motorcycle is ready to ride whenever you need to hit the road. The straightforward usage makes it a wonderful investment for every motorcycle enthusiast.

What does a flashing red light mean on a battery?

? Flashing red light – AC power and microprocessor is functioning properly. However, if the flashing continues, the voltage might be too low. Take a look to make sure the alligator clips are attached properly.#N#? Steady red light – The clamps are properly place and power is being transferred to your battery. The light will remain red until the battery is fully charged.#N#? Flashing green light – A flashing green light is often paired with a red light. This means the battery is about 80% charged and can be used.#N#? Steady green light – The charge is complete. You can keep the battery tender attached to the battery to help maintain the life of the battery if it will be sitting for an extended period of time.

Why does my motorcycle engine not turn on?

The reason? Low battery power.

How to use a battery tender?

To use a one of these devices, you just plug it into any standard AC outlet and use it to transfer power to the 12-volt battery in your motorcycle.

Can you use a trickle charger on a motorcycle?

Though the purpose is similar, a trickle charger doesn’t have microprocessor technology that prevents it from damaging the battery if you leave it charging for an extended period of time. Furthermore, you can use a battery tender when you plan on storing your motorcycle for several weeks on end, like over winter.

Is Battery Tender Different From Battery Charger Or A Trickle Charger?

Battery tender is different from battery charger or a trickle charger. Battery chargers charge the battery even when battery is full. Battery tenders on the other hand automatically stops charging when the battery is full.

What Happens To The Battery When You Store Your Motorcycle?

Many people think that while storing their vehicle they can just remove the battery and store it. They think that the battery loses its charge only when it ’s connected to the vehicle.

How Important A Battery Tender Is?

The key to increasing the lifespan of your motorcycle battery is to maintain an optimum level. To prevent both overcharging and undercharging your motorcycle battery you have to use battery tenders, a ‘smart charger’ that understands the need of your battery and charges it accordingly.

What is a battery tender?

So, what are battery tenders? Battery tenders are devices that keep your motorcycle battery charged at the optimum level through an AC wall outlet. A battery tender is an useful tool to extend the battery life if you are leaving your motorcycle unattended for a long time.

Why is battery tender important?

This feature keeps you from worrying about high or low amperage. Because you get to choose the amperage that suits your battery.

Why should voltage regulation be used?

Voltage regulation- It should regulate the voltage automatically to prevent battery damage by voltage fluctuation or overcharging.

When to turn off motorcycle battery charger?

So, if you are using a Battery Charger to charge your motorcycle battery, you must turn it off when the battery is fully charged and turn it on when the battery is low.

How to charge a bike with a battery?

You put one half on your battery and ziptie the connector up somewhere on your bike……then you can plug it in with ease. Most also include the alligator clamps you see above so you can charge something else easily as well.

What is a battery tender?

A modern battery tender, not to be confused with a battery charger, is intended to remain hooked up to the battery during storage. They only add a charge when the battery level starts to drop.

How long does it take for a 2 amp battery to charge?

A low battery will likely take more than an hour to charge on a 2-amp maintainer. These are not designed to charge low batteries, but rather keep a full battery charged over a period of non-use. The best way to charge your low battery is with a dedicated battery charger, not a maintainer.

What happens if you connect a tender all the time?

Summary: If you are in the habit of connecting a tender all the time, it’s likely that somewhere down the road you WILL be sorry.

How long does a wet cell battery last?

A conventional "wet cell" battery, with caps to allow adding water, will normally last from 2 to 4 years if you do nothing but be sure that it stays charged all the time (by whatever means) and check the water level occasionally.

Does Yuasa harbor freight tender work?

They all work and do the job. The cheap Harbor Freight ones just have a single red LED to show they are connected while the nicer Yuasa has a color changing diagnostic LED……and the other all variate somewhere between. In the end ANY tender will work fine…..just depends on how much information you want from the LED on the unit and how nice a box (and manual) you want the maintainer to come with.

Is Battery tender cheap?

The Battery Tender brand name ones are double the money which is still cheap compared to buying new batteries. I was just trying to save these guys some money.

Can A Cold Winter Destroy A Motorcycle Battery?

There may be some of you who didn’t know that a motorcycle battery required maintenance throughout the winter and may have done nothing throughout the cold months.

What happens to a motorcycle battery in the winter?

What Happens To A Motorcycle Battery During The Winter. Just like us humans, harsh weather conditions can be rough on motorcycle batteries. Unfortunately, it is completely possible for a motorcycle battery to freeze. Cold temperatures can inhibit a motorcycle battery’s ability to start a motorcycle.

What is the difference between a trickle charger and a battery tender?

A trickle charger and a battery tender both charge motorcycle batteries, but a trickle charger is different because it gives a constant charge rather than turning on and off like a battery tender. If you use a trickle charger, you’ll need to supervise the charge to ensure it does not overcharge …

Why does my battery tender stop charging?

You essentially can let it do all the work without a worry. Some people worry that the battery tender itself may freeze in the cold temperatures and fail to charge the battery.

How to keep motorcycle battery charged in winter?

To keep a motorcycle battery charged during the winter, you can connect a battery tender to it indefinitely throughout the season, occasionally use a trickle charger while supervising it , or completely disconnect it and keep it inside a controlled temperature environment and charge it in the spring. Living in an environment that has harsh winters …

What is a battery tender?

A battery tender is a device you can hook up to your motorcycle battery indefinitely throughout the winter. It has a sensor on it that will notify the system that the battery is starting to lose it’s charge and will automatically start charging it.

Why does my motorcycle battery charge?

The battery gets a normal, routine charge every time you ride your motorcycle because of the stator. The battery is only used to start the motor cycle and the stator continues to charge the battery while the motorcycle is running

No Comments

how to use a trickle charger on a motorcycle

Uncategorized

, , , ,

Now that the battery is disconnected,you can begin charging it using the trickle charger.First,connect the positive lead of the charger to the positive terminal of the battery.Then,connect the negative lead of the charger to a metal ground on the motorcycle frame.It is important to not let the leads touch each other,as this can cause a spark.Now,you can plug in the charger and turn it on.More items

Does a trickle charger really work?

Yes. A trickle charger provides a low current to the battery for slow charging. If it does not have a built-in automatic cutoff, it will continue to provide the current even when the battery is fully charged. What is the purpose of a float charger?

When to use trickle charger?

Three Types of Battery ChargersTrickle Charger s. A trickle charger is a kind of battery charger,but it is also a method to charge a battery. …Smart Battery Chargers. These chargers are made to charge batteries as quickly and safely as possible. …Jump Starters or Jump Boxes. These devices are very useful and practical to be used in emergency situations. …

What is the best battery charger for a motorcycle?

Best Motorcycle Battery Trickle Charger. Suuwer automatic trickle battery charger 6v and 12v. A trickle charger is constantly working and slowly trickling a small charge into the battery, even when it’s fully charged. US 12V 2A/6A Car Motorcycle Smart Automatic Maintainer from www.kisips.agh.edu.pl.

Will a trickle charger charge a dead battery?

The main goal of a trickle charger is to ensure to keep running a battery when not in use for a long period of time, even when it is self-discharging. However, it can bring life to a dead battery providing that it is in good condition and not thoroughly worn out. So, a trickle charger definitely can charge a dead battery.

How to fix a motorcycle battery?

Solve most of your problems by adding a trickle charger to your battery. This setup offers reliable power over time. 1. Take a Close Look First. Before you attach any power to a motorcycle battery, examine its outside housing. Look for signs of physical decline, such as: Cracks. Bulges. Leaking areas.

How to connect a battery charger to a battery?

Plug the charger into an outlet. Observe the setup. The battery and charger should instantly connect and show the current values. Power is now trickling into the battery.

What happens if you have a surge while charging?

If any surges occur during your charging session, the electrical energy flows right to ground. Battery damage and other issues might prevail if there’s an improper ground or none at all.

Why does it matter which cable to connect to the charger?

Because there’s no power attached to the charger, it doesn’t matter which cables should be connected first. Be sure to match the red or positive cable to the battery’s positive terminal and vice versa. These connections do matter once the charger has power.

Can you take a motorcycle battery off before trickling charging?

Remove the Battery From the Bike. Your battery takes a charge from the motorcycle’s electrical system, so it would make sense to trickle charge in the same manner. Most experts agree that removing the battery before trickle charging is the safest scenario.

Can you use a trickle charger on a motorcycle?

How to Use a Trickle Charger on Your Motorcycle Battery. You may not ride your motorcycle every day – maybe it’s more of a leisure vehicle for the weekends. This luxury works well for you, but the motorcycle battery may not agree. Hopping onto your bike one day might result in a disappointing morning with no power.

Can a bike battery be damaged?

Although it’s a rare occurrence, any electrical surges produced during the charging period can damage associated components. Printed circuit boards and sensors in modern bikes are expensive to replace in these cases. Err on the side of caution, and remove the battery.

What is a trickle charger?

A trickle charger, also sometimes referred to as a “Battery Tender” although that is actually just the most well known brand, is an item every motorcycle owner should have. Every time you park your bike in the garage, you should attach it to the trickle charger.

Do you need a trickle charger for a used bike?

This means that even if you’ve been out cruising on the highway at high RPMS, when you roll back into the garage, the battery may not be fully charged. All the more reason you need a trickle charger to top it up every time you come back.

Is an alternator better than a motorcycle?

Also generally the alternator is a lot better sized to properly charge it when it is used. At the end of the day, most people probably use their car a lot more than there motorcycle, giving it more chances to recharge.

Do motorcycles recharge their batteries?

Older and more budget friendly motorcycles often don’t do a great job recharging their batteries. While more and more newer feature correctly sized alternators on their bikes to support the accessory needs of the modern rider, many are still alternator deficient.

How Often Do You Need To Charge a Motorcycle Battery?

Keeping your motorcycle charged will come down to how often you use it. For those who ride on a daily or even weekly basis, your motorcycle’s battery should stay charged until its manufacturer-detailed lifespan ends.

What to do if your motorcycle doesn’t start?

If the engine doesn’t start, keep the other motorcycle running for a few more minutes and try again. Remove the clamps in reverse order; black clamp from the grounded surface, black clamp from the good battery’s negative post, red clamp from the dead battery, red clamp from the good battery. Depositphotos.

How long does it take for a rickle charger to charge?

In an effort to prevent overloading the dead battery, rickle chargers take a few hours to a full day to charge. Wait for the recommended period of time on the box. Remove the clamps in reverse order; black clamp from the grounded surface, red clamp from the dead battery, then start the motorcycle.

How to use a trickle charger on a motorcycle?

Using a trickle charger is similar to using a jump-starter, it just takes a little longer for the charge to rebuild. Remove the motorcycle’s seat to access the battery. Make sure your trickle-charger isn’t plugged into the outlet. Connect the red clamp to the positive post of the dead battery.

What to do if your motorcycle battery is dead?

If the dead-battery motorcycle doesn’t start after a few attempts, try reconnecting the battery cables, as they may just be loose.

How to avoid sparks on battery terminals?

Attaching cable clamps to the battery terminals in a single motion will avoid sparks.

What clamp to attach to motorcycle battery?

Attach the opposite red clamp to the live motorcycle’s battery’s positive terminal.

What is a trickle charger?

A trickle charger is essentially a slow battery charger that keeps the battery topped up at its discharge rate so that you can set off in the spring safe in the knowledge that your battery isn’t unexpectedly going to let you down. Experts at Bikesure, the specialist motorcycle insurance arm of Adrian Flux insurance, …

Can you use a trickle charger on a motorbike?

The battery is one element that needs regular attention and if it is left to completely discharge while the bike is in storage it won’t charge up as effectively …

Can a Wemco ring charger be left plugged in?

Wemco’s Ring RSCX1 Intelligent charger can be left plugged in for long periods of time which makes it attractive to those who might live a little distance from where they store their bike. Or for those who just can’t be bothered to walk to the shed or garage in the cold weather.

Can a bike battery be left in storage?

The battery is one element that needs regular attention and if it is left to completely discharge while the bike is in storage it won’t charge up as effectively when you are ready to hit the road again.

No Comments

how to use a timing light on a motorcycle

Uncategorized

, , , ,

To dynamically time a motorcycle ignition:Hook up your timing light as per the manufacturer’s instructions. …Remove the points cover.Start the engine.Aim the timing light through the points plate view hole.Confirm that the “F” mark aligns with the engine case’s timing mark at idle.Rev the engine to about 3,000 RPMs and confirm the parallel advance marks line up with the motorcycle’s timing mark.More items

How do you set the timing on a 4 cylinder motorcycle?

Hook up your timing light as per the manufacturer’s instructions. Start with cylinder 1-4 for a 4 cylinder motorcycle. Remove the points cover. Start the engine. Aim the timing light through the points plate view hole. Confirm that the “F” mark aligns with the engine case’s timing mark at idle.

How to dynamically time motorcycle ignition?

To dynamically time a motorcycle ignition: 1 Hook up your timing light as per the manufacturer’s instructions. … 2 Remove the points cover. 3 Start the engine. 4 Aim the timing light through the points plate view hole. 5 Confirm that the “F” mark aligns with the engine case’s timing mark at idle. More items…

How do you check the timing on a camshaft?

The mechanic should examine the flywheel at this point to locate the TDC timing marks. Highlighting the marks with an orange paint pen, for instance, will help to see the marks more clearly something that is particularly important when using a timing light for ignition timing checks. Camshafts are gear, chain or belt driven.

How can I tell if my car has a timing problem?

You can confirm it statically with the engine off using a timing light or an Ohmmeter, and you can time the engine dynamically with a dynamic timing light. You’ll want to set the spark just as it lines up with the mark on the engine case.

What is the TDC on a spark plug?

TDC is typically the point from where all timing procedures begin. However, a common drinking straw can be inserted into the spark plug hole to determine, approximately, when the piston is at TDC. When using the dial gauge, the actual point of TDC will be the point at which the dial needle begins to reverse its rotation.

How to rotate crankshaft when re-timing?

Whenever a mechanic has re-timed an engine, it is good practice to slowly rotate the crankshaft by hand— a wrench on the flywheel center bolt works best. This rotation must be done slowly and halted if the mechanic feels any resistance, as this may indicate a valve is hitting a piston due to incorrect timing.

How to determine stroke of engine?

For example, they must find which stroke the piston is on (inlet, compression, power, exhaust). A visual inspection through the spark plug hole is generally all that is required to determine the stroke. However, it is good practice to find the inlet stroke first; this can be achieved by visual inspection or by removing the inlet valve cover (where applicable) and noting when the valve opens the piston will begin its downward stroke as the inlet valve opens.

How to tell if piston is on compression stroke?

Another method of determining when a piston is on the compression stroke is to use a cranking pressure tester (compression tester). When the gauge shows an increase in pressure, the piston is on the compression stroke.

How to determine crank position?

When a mechanic approaches an engine to ascertain the crank position, they first must identify the position of number one cylinder. The vast majority of engines have timing marks on their ignition flywheel and often an arrow to indicate the running direction of the engine. However, if the mechanic is unsure of the direction of rotation, they should remove the spark plug (s), select 2nd gear and rotate the rear wheel in a forward direction noting the direction of rotation of the flywheel.

What does an experienced mechanic do?

The experienced mechanic will approach each engine design to ascertain the correct method for setting that engine’s valve timing. They may consult a shop manual for any special considerations, but in general, they will need to know:

What is timing mark?

Timing marks. Direction of rotation. Relative cylinder number (on multi-cylinder engines, each cylinder has a number applied to it. For example, on the four-cylinder Suzuki GS 1000 engines’ cylinders are numbered one through four from left to right—number one cylinder is on the left or clutch side) Knowing the timing system before disassembling …

How does a spark advancer work?

As the engine speeds up, the spark advancers works to manage when the cylinders get their spark. Your engine will likely either be equipped with a points or an electronic ignition to control the spark. When you set your ignition timing, you’ll either retard or advance the spark. In general, low compression engines will need more …

What is the timing mark on a camshaft?

When adjusting the camshaft, ignition, and valves you’ll refer to the timing marks on your engine’s spark advancer. For anything ignition related, you’ll typically refer to the F mark. For mechanical adjustments, you’ll use the T mark. If you find you’re getting no spark at all, you may need to troubleshoot your electrical/starting system first.

Why is it important to check your ignition?

As engines wear, they loose compression overtime, which is why it is important to regularly check and time your ignition to keep your engine in top shape .

What to do if you have no spark?

For mechanical adjustments, you’ll use the T mark. If you find you’re getting no spark at all, you may need to troubleshoot your electrical/starting system first. The ignition system is responsible for sending a spark to the plugs when the pistons are in the right positions – usually just before Top Dead Center.

How to confirm a car’s statically?

You can confirm it statically with the engine off using a timing light or an Ohmmeter, and you can time the engine dynamically with a dynamic timing light .

How to dynamically time a motorcycle?

To dynamically time a motorcycle ignition: Hook up your timing light as per the manufacturer’s instructions. Start with cylinder 1-4 for a 4 cylinder motorcycle. Remove the points cover. Start the engine. Aim the timing light through the points plate view hole.

What gauge to use to measure gap?

With a feeler gauge that matches the thickness of the point gap specified in your shop manual, measure the gap.

Why did my Yamaha XS650 slipping?

Coming back from a wonderful ride ( you can read about it here ), the ignition timing on my XS650 slipped due to a loose timing disc. There are two main ways to check the timing on your bike.

Where are the timing marks on a Yamaha XS650?

Yamaha XS650 timing marks. On the XS650 the timing marks are on the alternator side. Make sure you follow the manual as sometimes there are marks for timing and others for checking valve clearances. So the kit you need:-. In the picture you can see the manual, tools, strobe, battery and something to kneel on.

Can you use a 12 volt strobe on a bike?

In the picture you can see the manual, tools, strobe, battery and something to kneel on. The strobe I use needs a 12volt supply hence the battery. I find it easier to use a separate battery though you can use the 12 volt one on your bike if fitted. Strobes come in all shapes and sizes and it’s best to buy the best you can afford.

Do strobes melt?

The strobe clips around the first cylinder plug lead. Be careful not to drape the strobe wires near the exhaust pipes, yes, they will melt! Firing up the bike the strobe will emit a bright light each time the cylinder fires.

our51super

Hello all,<P>Will a timing light that was made for 12 Volt cars work on our 6 Volt Buick? I guess there would be no harm in trying it out, but I just wanted to hear what you had to say.<P>If it won’t work, does anyone make a 6 Volt timing light?<P>Thank you,

old-tank

Some 12V lights will work on 6V, but you can use any 12V source (another car battery,lawn tractor battery, lantern battery,etc)…all you need is a spark plug wire from the car you are timing.<BR>Willie

our51super

You know that really never crossed my mind. It’s the simple things that get me. Well, OK the complicated things get me too.<BR>Thank you for your help.<P>Let me ask one more timing question while I’m here:<P>I can clearly make out the timing mark on the flywheel but the stationary mark on the transmission housing is gone.

56Roadmaster

In the window a small bump toward the top may be the mark. also consider gettin a timing light which has an adjustable scale. With the engine off set the #1 cylinder at TDC compression note where the flywheel mark is in the window mark a corresponding mark in the window that is now your zero (TDC) mark.

No Comments

how to use a helmet lock on a motorcycle

Uncategorized

, , , ,

Get your hands on the cable of the motorcycle lock.Make the cable pass your helmet by making it through from the bottom area and out the visor.Once the cable is through the helmet,secure it in any suitable part of your motorcycle.Lock the helmet using a key or a combination code

How to lock your helmet to your motorcycle?

Use a Chain and PadlockFirst,take the chain and loop it through the D-rings on both sides of the helmet.Then,wrap one end around your bike’s seat post or other secure objects.Finally,use a padlock to close off both ends of the chain together to keep your motorcycle helmet safe from being stolen.

How to lock my helmet on my motorcycle?

What Other Ways Can I Lock My Motorcycle Helmet?Using the Built-in Motorcycle Lock. Most bike riders,especially the new ones,are unaware that some motorcycle comes with built-in locks.By Using a Pistol Lock. A piston lock is an affordable method of locking your motorcycle helmet to your bike. …Using a Padlock. …Bicycle Chain Lock. …

What is the best helmet lock?

Top-Rated Motorcycle Helmet Lock – List TableBigPantha Motorcycle Helmet Lock. Our top pick is this unique lock from the BigPantha brand. …Little World Helmet Lock Cable. Here is yet another multipurpose lock that works with all types of motorcycle helmets. …Helmetlok 4104 Carabiner-Style Lock. …Biker’s Choice 74937S2 Helmet Lock. …Master Lock 2 Keyed Motorcycle Helmet Lock. …Helmetlok 4101 Rubberized. …

What to look for in a good motorcycle helmet?

No ASTM certificationStyle it the way you likeFlexible and easy to adjust for the right fitLightweightComes with a chinstrap

Where Do You Want to Attach Your Helmet?

Now you may have the idea of the lock you want to secure your helmet onto your bike. But you do not know where exactly you want to attach your helmet. For motorcycle helmet lock how to use it, there are certain options on where you want to lock your helmet.

How to make sure your bike is safe?

To make sure your bike is safe, your lock should secure properly at a certain location. You must park your motorcycle in a safe place. To prevent the thief from luring around your bike and your helmet is to use an appropriate lock and consider where you want to attach the lock. This will make it tough for the thief to break the lock.

How to use a padlock on a bike?

To use the padlock is easy. All you have to do is pass the helmet buckle through the padlock and lock your bike. That way, the thief will find it harder to break the lock and steal your bike.

What is a helmet lock?

A helmet lock is a great tool to secure your bike and helmet to prevent the thief from coming near to your motorcycle.

Why is it important to lock your motorcycle helmet?

Locking your motorcycle helmet is important to prevent the thief from stealing your helmet.

How to lock a bike helmet?

With easy to use procedure, all you have to do is simply thread the lock around the chin bar and place the lock to the frame of your bike. After locking your helmet, your bike is safe and secured!

How to place a helmet on a mirror?

On the mirror: attaching your helmet on the mirror is a good location. To place your helmet on the mirror is to run your helmet to rest onto the handlebar. Then attach the lock and your bike is safe.

How to keep motorcycle helmet from getting stolen?

The bicycle chain lock is an incredible way to keep your motorcycle helmet safe from getting stolen. Bicycle chain locks are long enough, and you will get the benefit using this feature of it. After locking your helmet with it, you can keep your helmet in a clean place. Either away from your motorcycle, or nearest area, the choice is yours.

How to fasten a motorcycle helmet?

All you need to do is find a suitable place in your motorcycle like a handlebar, or bike frame, or any place that you choose. And fasten the helmet using the padlock.

Can you lock a motorcycle helmet with a padlock?

There is no difference between locking a motorcycle helmet using a motorcycle lock and padlock. Once you secure your helmet with a padlock, there is no chance for a thief to break it. 3. Bicycle Chain Lock.

Can you lock a helmet with a bike?

However, you can lock your helmet with your bike at any parking lot and do shopping with no tension following the below simple locking options. Motorcycle lock (it is a built-in). Padlock. Bicycle chain lock. Pistol lock.

Does my motorcycle have a padlock?

Does your motorcycle carry any padlock helmet lock? If NO, then you should follow the padlock locking system. A padlock is easy to find in the store, affordable, and a unique way to lock your helmet when you reach your destination.

Does the D-ring lock work on a helmet?

But it has one problem: with a D-ring style helmet fastener, this lock works with the helmet.

Where can I get a pistol lock?

I believe you don’t own a pistol lock. You can collect it from your hometown store or Amazon, spending a maximum of $10. Also, check to your nearest police station because they might have any spare pistol lock. Even talk to your friends and relatives, if they have any additional items.

Do I Need a Helmet Lock?

As a motorcycle rider, you need to have a helmet lock, except you are a fan of carrying your helmet alongside.

What is the Most Suitable Helmet Lock For My Motorcycle?

To know the type of lock to buy, you have to decide which of them you prefer. Some helmet locks have a point of attachment to the motorcycle, while others have builds that make it easy to carry around.

How to Use a Motorcycle Helmet?

The helmet lock is made to fasten your helmet to your motorcycle. And the most suitable way to secure your helmet is to mount it to the part of the bike that is not removable.

What is the Best Way to Lock Your Motorcycle Helmet?

One of the best ways of locking your motorcycle helmet to your bike is by engaging the gun lock or cable lock.

How to fasten a helmet buckle?

To fasten it, simply pass the helmet buckle through the lock and pin it to your bike. It is as safe and secure as using your motorcycle built-in lock, and before thieves can steal it, they have to break it, which is quite impossible.

What is piston lock?

A piston lock is an affordable method of locking your motorcycle helmet to your bike. They are available at any shop, or you can still ask a friend who works at a police station to hand you one.

Why do motorcycle helmets have locks?

Helmet locks make it easy to pin your helmet to your motorcycle for safekeeping from theft.

How to secure a motorcycle helmet?

So, how to secure motorcycle helmet? To secure your helmet is an easy process, and when ready, pass the padlock via the helmet buckle and lock it . Before you get started, you need to consider the size of the padlock—test whether it fits perfectly around the motorcycle foot peg, handlebar area, or part of the frame.

How to secure a helmet?

One more way to secure your helmet is to use a helmet lock, a gadget that deters thieves away. The device is small and features a lightweight design. However, it’s sturdily made and features a strong cable to secure the helmet. In addition, it may have a locking mechanism that incorporates unique codes.

How to keep motorcycle helmet from being stolen?

Finally, use a padlock to close off both ends of the chain together to keep your motorcycle helmet safe from being stolen.

What is a pistol lock?

As the name suggests, a pistol lock is a gun-like lock that you can use to keep your motorcycle’s helmet safe. Depending on location, you can get one from the authorities for free or purchase from local stores.

How long does it take to lock a helmet?

The process is simple and only takes less than five minutes to lock the helmet. In addition, it keeps away thieves since trying to remove the helmet will only damage it.

Can you use a chain and a padlock on a motorcycle?

Alternatively, you can use a chain and a padlock in easy steps. The wire forms a stable lock around the helmet and motorcycle so that it doesn’t move.

How to use a bike chain lock?

You begin by threading the lock wire via your helmet’s bottom component as well as the open visor location and after that lock it to your motorcycle framework.

How to lock a motorcycle helmet?

Locking your helmet with a motorcycle helmet lock is easy. Pass the rubber-coated cable with the bottom of your helmet, and also out with the visor. After that fix it to your bike frame or any other part of your bike you discover ideal.

What is a helmet lock?

Helmet locks are basic devices that connect to your helmet and also the framework of your bike, stopping the helmet from obtaining stolen. Most common helmet locks utilize a cord to protect your helmet.

Why is it important to have a helmet?

Other than that, having a helmet conserves you from the danger of having it taken.

Can you use a cable lock on a bicycle?

The con of using a bicycle cable television lock is the size. Where devoted helmet locks are made small and light to fit under your seat, the bike cable locks aren’t. They are quite a dimension and also they might not fit under your seat.

Can a gunlock be used as a helmet lock?

As amusing as it seems, a gunlock can act as a helmet lock Using a helmet lock is excellent, but it costs you extra money. And also you may save much if you have an extra gunlock.

Can you use a helmet lock with an open visor?

But suppose you have a helmet with an open visor? Because instance, you can use a helmet lock that clicks your chinstrap right into the lock to protect your helmet.

What is a bolt lock?

These locks usually use a key and are cylindrical. The bolt locks are tiny, easy to install, and are meant to sit on the bike permanently. They come with a motorbike helmet holder where you can lock your helmet securely. The good thing about bolt lock is that they are very strong and so you can park your bike anywhere without worrying that someone might run away with your helmet, or wind blowing it away.

What is the cord on a helmet lock?

Just like its name, the lock comes with a cord that is made of rubber to increase its durability. The cord runs around your helmet while locking it in place using a key or a combination of several keys.

What is a handlebar lock?

A handle-bar helmet lock is a visible one, and many love its design. The lock is made of durable and beautiful metal that doesn’t need any polish or paint. This lock holds the helmet in place on the handlebar and keeps it safe. When getting such a lock, you may choose to get the two of them, for both visual appeal and the balance on the handlebar.

How long does it take to install a lock?

The locks aren’t hard to install and require nothing more than a wrench. In less than half an hour, the installation will be done.

Where is the lock on a bike?

The lock does not only leave the bike’s appearance original but also maintains balance since it is located at the center. These locks are made of metal, which means that once you lock your helmet in place, no one can get it from there without your permission.

How Does a Helmet Lock Work on a Motorcycle?

Once you get your lock attached to the frame of your motorcycle, you should fasten the helmet to the lock. Depending on your lock, for instance – if you have a key lock, you will use a key to lock the helmet to it, which will prevent anyone trying to grab your helmet from disconnecting it from a lock.

How Do I Use My Helmet Lock?

We gave you a rough explanation of how to use a helmet lock, but here, you can get familiar with this easy process of locking your helmet.

What is a Kuryakyn 4248 helmet lock?

The Kuryakyn 4248 helmet lock offers a convenient and unique solution when it comes to protecting your motorcycle gear. It boasts a bit unusual design and reminds of a license plate lock.

How to use Helmetlok 4101?

This one is simple – open it up, slip through your helmet, and lock where you think it is suitable. The Helmetlok 4101 truly takes away the hassle most helmet locks include. You can attach it almost anywhere you like as it boasts a pivoting locking arm.

What is the best lock for motorcycles?

If you hate wearing your helmet all around, the BigPantha lock may provide good security and excellent overall value.

Why lock a motorcycle helmet?

Using the best motorcycle helmet lock for your bike will not only help you with the helmet – it will also help with healthy habit development. A lot of people either lose or forget their helmet, thinking that “just this time without it” is an OK choice, when in fact it isn’t.

What is a BigPhanda helmet lock made of?

Made of carbon fiber, this helmet lock stands out from the rest. Instead of making a generic lock, BigPhanda decided to go for sturdy, high-quality materials so you can be carefree about leaving your piece of gear outside.

No Comments

how to unlock motorcycle handlebars without key

Uncategorized

, , , ,

Use a Wrench. If you have the proper wrench,this is one of the easiest methods for removing a motorcycle steering lock without the key. Position it around the locking mechanism or insert it into the gap between the fork support and the end of your bike’s handlebar to create enough leverage to remove it. 5. Use a Drill.

How to unlock a bike lock without keys?

Using a pen to unlock a bike lock without keys is an extremely old school method of lock-picking. This technique is unlikely to work on newer bike locks, as the pen simply won’t fit into the cylinder.

Can a locksmith cut a bike lock off?

A locksmith may end up having to cut your bike lock off, but at least you’ll have your bike back. It’s now time to get a good quality replacement lock!

How to pick a bike lock?

Now, to pick your bike lock, you’ll need to insert your tension wrench into the keyhole (plug) and apply some tension to the cylinder. From here, insert your picking tool and feel for the key pins. Once you have located the first key pin you’ll want to slowly nudge it up, maintaining tension with the wrench.

What do I do if I Lost my Bike keys?

If you’ve lost the keys to your bike and have attempted these simple steps already, you might want to contact a local locksmith. Locksmiths have great knowledge or locking systems and will be able to help you unlock your bike lock without it’s keys.

Why do you need a locksmith for a bike lock?

You may also decide to use a locksmith because you don’t want to damage your bike lock or be accused of stealing! Both are perfectly good reasons.

How many shims do you need to unlock a bike lock?

Now that you’ve made your shim, insert it into the shackle hole, and attempt to override the deadbolt. If your lock is double bolted, you may need to use two shims (one on either side of the shackle) to unlock your bike lock.

How to pick a bike lock?

Now, to pick your bike lock, you’ll need to insert your tension wrench into the keyhole (plug) and apply some tension to the cylinder. From here, insert your picking tool and feel for the key pins. Once you have located the first key pin you’ll want to slowly nudge it up, maintaining tension with the wrench.

How to remove ink tube from BIC pen?

Take a BIC style plastic pen and remove the ink tube from inside along with the cap from the end. Now you should have the plastic body of the pen, which can be inserted into the tubular cylinder.

What does a locksmith do?

A locksmith will have the tools needed to remove almost any lock, which will save you time and dignity!

What do you need to make a shim?

To make your shim, you’ll need an empty fizzy drinks can.

Can you use a pen to unlock a bike lock?

Using a pen to unlock a bike lock without keys is an extremely old school method of lock-picking. This technique is unlikely to work on newer bike locks, as the pen simply won’t fit into the cylinder. The picture below shows an example of the cylinder needed for this trick to be possible (a tubular cylinder).

Can a locksmith pull the ignition cylinder?

A good locksmith should be able to do it, but they’re hard to find these days. You will probably have to at the least, pull the ignition lock cylinder or take the triples off.

Is WTT subject to rules?

This is an unfortunate consequence of a few members’ abuse of the forum. All FS, WTT, WTB threads are subject to the specific rules outlined in their respective subforum.

Does an ignition key work on a gas lock?

Many times the ignition lock is has more cuts in it for added security, and while the ignition key will operate the gas/helmet locks if you cut the key off of them it might not work in the ignition.

Is a motorcycle a fun toy?

Motorcycles are not just fun toys. They are a catalyst for the enjoyment of life. – NaimChase (Richard Jenkins, RIP)

Can you replace the gas cap on a track bike?

If this is a track only bike, then you can replace the gas cap with a twist-off one and won’t need to worry about the rear seat.

No Comments

how to turn a bike into a motorcycle

Uncategorized

, , , ,

How do you make a turn on a motorcycle?

Part 3 Part 3 of 3: Performing the U Turn Download ArticlePivot about 12 feet (4 m) (3.7 m) before the U turn. …Turn your head and handlebars in the direction of your U turn. …Keep your weight upright over the bike. When U turning on a motorcycle,many bikers are tempted to heavily lean into the turn.Look in the direction you want your bike to roll. …

How to get started with a motorcycle?

The best way to get to know how a bike operates is to sit on it and go over the functions of the controls before starting it up.Get a feel for how you fit on the motorcycle. Grip the handlebars,clutch lever and brake lever. …Make sure you can easily plant your feet on the ground. Get a feel for the weight of the bike underneath you. …

How to jumpstart your motorcycle?

Method 5: Kickstart a MotorcyclePut your bike in Neutral first. In most cases,your motorcycle will be in first gear before stopping in the last ride. …Alternatively,you should shift into neutral now.Hold down the clutch. …The third step is to get your motorcycle going. …After starting the motorcycle,change into first gear. …

How to turn a motorcycle effectively to improve corner entry?

You should use it.Chassis Control. We all know to use the front brake to slow down,especially at high speeds,but before you reach for the front lever,try using the rear brake …Corner Corrections. …U-Turns. …With A Passenger. …Wheelie Control. …Don’t Write Off The Right Lever. …

What is a mid mounted two stroke?

The mid-mounted two-stroke is by far the lightest and most compact solution here, but as with all two-stroke engines, maintenance is a little more involved. Namely, getting the fuel-oil ratio right is key, both for engine life and performance. This kit mounts lower on the bike frame, which in turn keeps the center of gravity low and gives the bike a more natural feel, similar to a full-fledged motorcycle.

How does a Bumble Bee bolt on work?

The front-wheel-drive system offered by Bumble Bee Bolt-On may change your bike’s steering feel slightly by adding weight over the front tire, but it is by far the simplest system. Since it slides on over the top of the wheel, and doesn’t use a chain or belt drive, it can fit on almost any size wheel. The drive system uses a drum that presses against the tire, using friction to spin the wheel. The lack of a chain means a simpler system overall with fewer moving parts, which means less maintenance. Since this bolt-on drives the front wheel, adding pedal power essentially creates a hybrid all-wheel-drive system.

How much does it cost to build a motorcycle?

Make your commute shorter, quicker, explore more by traveling farther faster — build you own motorcycle for less than $600. You could source every part individually, from either junkyards or the internet, but that’s a more complicated process than is necessary.

What drive led to the conception and construction of continent-spanning nations with modern sprawling cities?

The drive that led to the conception and construction of continent-spanning nations with modern sprawling cities is the same determination that led to the Wright Brothers’s success at Kitty Hawk, won the space race and is the key ingredient in so many land speed records. Another result of that natural need to innovate and progress is …

How does a Golden Eagle rear mounted engine work?

The Golden Eagle rear-mounted engine keeps everything compact and out of the way by making the gas tank and the engine the same unit. The number of parts is minimal, and the engine mounts above the rear wheel, keeping the entire setup out of the way so as not to obstruct casual riding.

Is a midmounted 4 stroke kit better than a 2 stroke kit?

The mid-mounted four-stroke option is larger and heavier than the two-stroke kit above, but it runs cleaner and smoother. You don’t have to worry about fuel-oil ratios, but due to the width of the engine, you may have to put extenders on your crank set so the pedals can be free to spin.

What to do if your bike cuts too far?

Cutting a corner to near or far can put you in dangerous proximity to oncoming traffic or obstacles, like a guardrail or safety wall. Analyze the angle of your turn and keep your eyes focused well ahead of you on the approaching road. This way, you’ll be ready to make corrections the instant you notice a need for one.

What happens when you turn a motorcycle in the opposite direction?

Turning in the opposite direction causes the motorcycle to lean towards the direction you want to turn, and the geometry of the motorcycle and steering will cause it to follow through in the direction of the lean. Continue to apply light pressure away from the turn as long as you want to be in the turn.

How to get a better idea of what’s on the other side of a turn?

Scope out as much of the turn as possible while approaching it. Keep your eyes on the oncoming road, and if possible, peer through foliage and obstacles to give yourself a better idea of what’s on the other side of the turn. However, don’t get too carried away.

How to slow down a car in a turn?

Reduce your speed as the turn approaches. Release the throttle to slow your speed and gently apply the brake, if necessary. You’ll want to be at the recommended speed for the turn, or as slow as you feel comfortable, before entering the turn. If it arrives more quickly than you expected, you may need to apply both the front and rear brakes simultaneously in order to slow down enough for the turn.

What happens if you turn your head too far to look over your shoulder?

If you turn your head too far to look over your shoulder at traffic behind you, you might end up turning your handlebars as well. This can dangerously throw off your balance while approaching the turn.

Why does my motorcycle lose traction?

Loose gravel or roads in poor condition can cause your motorcycle to lose traction while in a turn. Keep your eyes peeled for loose material on the road and attempt to avoid it if possible. If you must drive over loose matter, reduce your speed.

How to know which gear to use for a particular turn?

To gain a better sense of which gear you should use for a particular turn, you should choose a stretch of low traffic road with turns that you know well. When the road is clear, approach the turn and slow your bike to shift into a lower gear than you typically use. Then repeat this exercise one gear higher than you would normally. While you’re in higher gears it will likely be more difficult to accelerate out of the turn.

How to make a street bike into an adventure bike?

but don’t fool yourself. It’s no dirtbike and never will be one. Changing the tires would be first: the rest is up to your own desire to tinker.

What is a KLR fork?

A pair of KLR forks are a direct bolt on for the Seca. This opens up the front to tire possibilities and suspension travel. The rear is a mono-shock so a lengthier mono-shock will compensate the rake angle of the longer forks. This also serves the purpose of giving the bike an overall "lift kit".

Can a bandit ride on gravel?

A Bandit should be able to handle a mild dirt or gravel road just fine with at least marginally appropriate tires. It will never be that good on dirt, gravel or sand because it’s a big beastly streetbike, but who gives a damn. Just don’t get yourself killed and ride it.

Is lighter better than gravity?

Lighter is better, as is a low center of gravity.

Why do motorcycles stop faster when they are straight up and down?

Motorcycles stop faster and accelerate harder when they’re straight up and down, because that’s when the tires put the most footprint to the road surface. Suspension components also work best in the pure vertical plane—leaning the bike over puts side loads on them, encouraging binding and frame flex.

What does CG mean on a bike?

In each illustration, you can see three red circles: one represents the center of gravity (CG) for the bike, one for the rider, and the third the combination of the two. There’s little you can do about your bike’s CG, but by hanging off you can move your CG (and thus the combined CG) lower and farther into the turn, …

Can you use your leg as a stabilizer on a bike?

In return, you’ll have a greater tire footprint and better suspension compliance. If you hang off far enough to actually touch your knee to the ground, you can also use your leg as stabilizing support to help hold the bike up in the turn.

Stud Those Knobbies: Tire Screws

The simplest, cheapest way to go? Stud your own dirt bike’s tires. Do you have a set of knobbies hanging around (maybe the worn ones that are still on your bike waiting for a spring swap)? Even if they’re mounted on the bike, you can stud them in situ.

Get Some Studded Tires

We’ve all seen that video of a sportbike riding ice with dagger-like tire studs, right? That style of stud bolt must be installed from the inside of the tire, so if you want to install those you’ll need to take your tire off the rim, and then deal with remounting a tire covered in daggers. These are absolutely tractionless on pavement.

Convert To A Tracked Snow Bike

Finally, if you are loving your winter motorcycling and cannot wait to get out on deep-snow trails on your bike every weekend, a snow bike tracked conversion kit might be your top level of fun in the snow.

No Comments

how to tune carbs motorcycle

Uncategorized

, , , ,

How do you tune a carbureted motorcycle?Verify carburetor is set to stock settings:Start bike,bring to operating temperature.Set idle speed adjusting screw,clockwise to increase rpm,counter-clockwise to decrease rpm.Adjust idle mixture by turning idle mixture screw slowly clockwise until the engine runs poorly.

How to Rejet your motorcycle carbs?

Fine tune your motorcycle before rejetting your carburetor.Remove the bowl at the base of the carburetor by unscrewing the screws holding it in place.Use a screwdriver to remove the main jet from the brass jet needle holder,which is also called the emulsion tube.Put in a pilot jet that is one size larger.

How to tune a motorcycle carburetor?

How to Tune a Carburetor on a MotorcycleRemove the air cleaner cover with an Allen wrench. Loosen the air cleaner with a Torx wrench.Disconnect the two breather tubes from the top of the air cleaner with your hands. Remove the air cleaner.Put the motorcycle in neutral. …Spray short bursts of aerosol carburetor cleaner into the venturi (the open mouth) of the carburetor.More items…

How to adjust a motorcycle carburetor?

How to Adjust a Motorcycle CarburetorRemove Dirt,Debris,and Oil Deposits. Locate your bike’s carburetor and spray its outer surfaces with carburetor cleaner to dissolve any oil deposits that have built up …Check Your Carburetor Fuel-Air Mixture. Start your bike and let it run. …Adjust Your Mixture Screw Setting. …Final Mixture Screw Setting Check and Adjustment. …

How to clean motorcycle carburetors?

In order to do this,you need to follow these steps:Remove the engine oil cap.Pour 1 ounce of Sea Foam directly into the oil tank with the help of funnel.Once done,you need to take your motorcycle for a test ride.Monitor the condition of oil every day,once the oil turns black you need to replace it with fresh oil.More items…

How does a Mikuni VM28 RD350 float work?

As the bowl fills from the fuel tank, the float rises, pushing its float needle toward its closed position. As the engine takes fuel from the bowl, the float drops, opening the float needle and admitting fuel to restore the correct level. Mikuni VM28 RD350 float bowl and carburetor body.

How does air flow through a carburetor affect fuel flow?

Because of this, the air volume under the slide affects the speed of the fuel flow response. This flat-slide has a much lower air volume beneath it than do the round slides of earlier carb designs, giving it more immediate response. Mark Hoyer

Why do carburetors have a lean mixture?

Because carburetors have a number of overlapping systems, each with its own adjustment range, tuning them to give the desired mixture over the engine’s operating rpm is a step-by-step process . In a cold engine there are no hot surfaces to vaporize the fuel spraying from the carburetors, so the cylinders receive a very lean mixture, …

How is the float needle height controlled?

Float needle height is controlled by the floats in the float bowl, lifting the float lever (not seen here) whose tang bears against the float needle. In some carbs the float needle and its orifice are a unit screwed in place, allowing provision of a range of flow rates.

Where to find Mikuni 6DH4?

On the most right-hand of the four slide needles you can see its identifying code. A 6DH4 Mikuni needle begins at a one-degree taper, then steepens to a two-degree taper. These codes can be found in the carburetor manufacturer’s tuning information. Usually that portion of the needle that is in the needle jet during the first 1/3 of slide lift is not tapered, allowing mixture to be controlled by slide cutaway. Mark Hoyer

What is the choke system on a carburetor?

The first is the choke system, which on many Japanese carburetors takes the form of a small and very rich starting carburetor, built into the side of the main casting . When you flip on the choke before cold starting, you are opening the tiny cable-operated throttle of this starting carburetor.

What is the bellmouth on a carburetor?

The flaring entry to the main air passage is the carb’s bellmouth (gigantic equivalents are used for ground-testing of jet engines). Attached to the throttle slide to project downward beneath it, and moving up and down with it is a tapered metering rod called the jet needle (abbreviated JN). Its tapered lower part fits into a brass sleeve located below the slide in the bottom of the air passage: This is the needle jet (NJ). Fuel flow from the needle jet is controlled by the tapered needle. Screwed into the bottom of this needle jet is the main jet (MJ). Each of these metering parts—needle, needle jet, and main jet—bears identifying markings.

What happens if you turn out an airscrew?

If your airscrew is on airbox side of carb, turning out will lean mixture. If airscrew is on engine side of carb, it will richen it.

What makes a carburetor smooth?

Clean, smooth acceleration happens when all components of the carburetor are clean and tuned properly. The right sized jets, needle positions, and float settings will ensure there is no fumbling or flat spots from idle all the way to wide open throttle.

Why is my motorcycle not running?

If your motorcycle engine doesn’t seem to be running correctly, it’s probably either too rich or too lean.

How do you tell if a carburetor is rich or lean?

If the insulator near the plug tip is a nice light tan colour then it’s running approximately correct at that load/rpm. If they’re white then it’s running lean, if they’re a dark brown or worse colour then it’s running rich.

How long does it take to dyno tune a motorcycle?

Carbureted motorcycles typically take two hours, due to the fact that there are fewer adjustments that can be made on carburetor engines. Additional costs depend on the method that is used; the price of adding a Race Tuner, ThunderMax, etc.

Should I dyno tune my motorcycle?

Why should I get my bike Dyno – Tuned? If you have performance work done to your bike, you should have your engine tuned to get optimum performance without sacrificing drivability or fuel economy.

How do you lean out a carburetor?

The first thing to do is not set up the idle speed, but to set the Idle mixture screw to lean best idle setting. First, turn in the mixture screw until the engine dies or runs worse, then back out the screw (recommend turning ¼ to ½ turn at a time). The engine should pick up speed and begin to smooth out.

What are signs of a bad carburetor?

Reduced engine performance. One of the first symptoms commonly associated with a bad or failing carburetor is a reduced engine performance.

How do you set a carburetor mixture?

Then, turn the screw counterclockwise 1-1/2 turns. If your carburettor has a main jet adjustment screw at the base of the float bowl , turn the screw clockwise until you feel it just touch the seat inside the emulsion tube.

How do you adjust a fuel mixture screw?

Here’s how you adjust them. Start the engine and let it warm up. Set the idle screw so that the engine is idling at a normal RPM. Take a small screwdriver and start turning one bleeder screw on one side of the carb inward until the idle either drops or rises.

How to find the middle between a rough and a revving engine?

While the issues with your engine may not be related to the carb, tuning the air-fuel mixture is a way to solve them. To find the middle, turn the screw clockwise again.

How to tell if a carb is lean?

A carb with a decreased flow of fuel is lean or made leaner. When the fuel is increased it is rich. The easiest way to tell this is to listen to the engine while is idling. If it sounds rough, like it’s coughing it’s lean, if it’s revving, it’s rich.

What happens when you lower the RPM on a bike?

With the default settings, your bike should be smooth while idling. But when you lower the RPM at which it idles, it will start to sound rough. As you may have noticed with your bike.

What does it mean when your bike sounds rough?

You don’t want your bike to be running on a lean mixture for a long time. A rough-sounding engine means that there is not enough fuel. This also means that there is a lot of friction between parts which leads to damage .

Why are carbs important?

Carbs are important for starting bikes and maintaining the air-fuel ratio. If you’re going to be doing this, read the step-by-step guide thoroughly. How to adjust the air-fuel mixture on motorcycles.

How to tighten a fuel mixture screw?

This is a complicated process, so remember to be careful. Tighten the fuel mixture screw by turning it clockwise. This will decrease the amount of fuel getting in, i.e, making it leaner.

How to change the fuel mixture on a car?

Here’s how to do that. Warm-up engine for 5 minutes. Locate carburetor mixture screw. Tighten the screw. Unscrew and count the turns.

Why do I need to tune my carburetor?

WHY DO I NEED TO RE-TUNE MY CARBURETORS WHEN I INSTALL NEW A EXHAUST SYSTEM? 1 SUCK: Aftermarket Exhaust systems allow the engine the breath better. Meaning that the general “flow” of air as it makes its way in and out of the motor increases in both velocity and volume. When any changes are made outside of what was set in place from the factory, such as slamming a pipe down the center of your muffler to “open” the exhausts set restriction or simply changing out or removing the baffles. The Air/fuel ratios become imbalanced.#N#NOTICE that when I speak of “breath-ability” I am only speaking of AIR and not FUEL. 2 BANG: Since this new upgrade has resulted into what is called a LEAN mixture (more air then fuel) we now have to increase the flow/volume of FUEL in order to get back into that sweet spot. Which for gasoline engines is the chemically efficient and complete combustion mixture of 14.7:1 (14.7 parts air to 1 part fuel). 3 BLOW: Since we know that the purpose of exhaust is to get the spent gasses away and out of the engine as fast and efficiently as possibly its important to know that the LEAN mixture we care causing can be detrimental to a combustion engine.

Why use a main jet needle?

Even though carburetors have multiple air and fuel restriction points to make the throttle respond smoothly through its full range , the MAIN JET NEEDLE helps set the foundation of how much and when that mixture is most effective . Here is a diagram that you can chew on to further explain the science.

What is the loudest exhaust system?

When you swap out the stock exhaust with less restrictive quality’s of a louder or type exhaust such as the ever popular straight pipe also known as “drag pipes”, typically being the loudest systems due to their open pipe qualities.

What is the process of exhaust scavenging?

Highly sophisticated engineers develop exhaust pipes and mufflers to handle the pressure waves, noise waves as well as a process called “ scavenging ” through ways such as exhaust tube size, length, and restriction points.

How does exhaust work?

As exhaust leaves the combustion chamber, through the exhaust port and into the first bend or section of the piping it expands and slows, developing pulse waves of both the burnt gasses and sound waves as it makes its way down the system.

What is the last and final stroke of an engine?

As your engine goes through its cycles, it’s last and final stroke is called the EXHAUST stroke.

What happens when sound waves push out of exhaust?

Once that wave makes its way into the larger portion of the exhaust which is typically the muffler it slows down again as it comes into contact with different packing materials such as BAFFLES. What you hear is the end results of that sound waves final push out of the system.

How do Jets on a Carburetor Work?

The carb jets described above create tiny passages and nozzles throughout the carb throat and body.

What is the idle jet system?

The idle jet system controls about 0 to 25% throttle opening.

What happens when gas level changes on a float?

As the gas level changes, the tab connected to the floats will either lift or depress the needle in its seat and either stop or allow fuel to flow into the float bowls.

How much throttle does a jet have?

The main jet controls from about 60 to 100% throttle opening.

Why do you move the clip down on a jet needle?

Moving the clip down will raise where the needle sits and make the fuel/air mix richer. If you have a jet needle with only one clip position, you can usually replace it with a jet needle with multiple positions to allow for adjustment.

Where is the jet needle on a carburetor?

The jet needle is found in the center of the throttle slide. Different carbs have needles with different tapers. Some have grooves near the top which will allow you to change the clip position. Moving the clip up effectively moves the needle down and will lean out the mixture from about 20 to 80% open throttle.

Where do carbs exit?

Channels in the carb run from the idle jets and air screws and exit just in front of the throttle plate. As the vacuum increases, the control moves to the needle jet.

What happens if your car doesn’t run smoothly?

If the engine does not run smoothly at low speeds, fouls plugs, blows black smoke or gets bad gas mileage a smaller (leaner) intermediate jet needs to be installed. Always readjust the idle mixture (#2) and idle speed (#1) screws after making a jet change.

What size air bleed for 2004 S&S shorty carbs?

This also aides with tuning an engine that is fitted with an exhaust system that is not intended for high performance. The air bleed uses main jets, the stock size is 40 . If it needs to be changed the range is normally 50 to 60.

What does it mean when an engine is lean?

If the engine has a flat spot, or is popping/sneezing in the air cleaner, it can indicate a lean condition. If you notice stumbling or sputtering, it can indicate a rich condition. Low rpm operation is controlled by the intermediate jet (#11).

Can you drag a carburetor?

NOTE: Drag or straight pipes, especially large diameter or long designs, can prevent you from obtaining optimum carburetor performance.

No Comments

how to trickle charge a motorcycle battery

Uncategorized

, , , ,

bikesure.co.ukImage: bikesure.co.ukCharging the Motorcycle with a Trickle-ChargerRemove the motorcycle’s seat to access the battery.Make sure your trickle-charger isn’t plugged into the outlet.Connect the red clamp to the positive post of the dead battery. …Connect the black clamp to an unpainted,grounded metal surface somewhere on the motorcycle’s frame.Once everything is connected,plug the trickle charger into the outlet.More items

What is the best battery charger for a motorcycle?

Best Motorcycle Battery Trickle Charger. Suuwer automatic trickle battery charger 6v and 12v. A trickle charger is constantly working and slowly trickling a small charge into the battery, even when it’s fully charged. US 12V 2A/6A Car Motorcycle Smart Automatic Maintainer from www.kisips.agh.edu.pl.

How to fill and charge a new motorcycle battery?

Step-by-step guide to use with instructionsSafety First. This job requires working with battery acid,which is toxic and highly corrosive. …Open the box. Here’s what you get in the box. …Remove the seal. …Remove the vent port cap. …Cut open acid container. …Fill the battery. …Clean up any spilled acid. …Install the cell caps. …Charge the battery. …Check the cell levels. …

How long to charge motorcycle battery?

The average time to fully charge a motorcycle battery ranges anywhere between half an hour to 24 hours. The factors affecting the speed of charging include the battery capacity, the initial battery charge, the voltage output of the charger, the type of charger you use, and the temperatures of both the charger and the motorcycle battery.

Do you need to charge a brand new motorcycle battery?

The remaining 30% will require another 7 – 10 hours before it is ready to install on the motorcycle. A new, sealed, pre-charged battery is generally charged to 80% when you buy it, and should be connected to a charger for 4 – 6 hours to reach maximum charge before putting it in the bike.

How to fix a motorcycle battery?

Solve most of your problems by adding a trickle charger to your battery. This setup offers reliable power over time. 1. Take a Close Look First. Before you attach any power to a motorcycle battery, examine its outside housing. Look for signs of physical decline, such as: Cracks. Bulges. Leaking areas.

How to connect a battery charger to a battery?

Plug the charger into an outlet. Observe the setup. The battery and charger should instantly connect and show the current values. Power is now trickling into the battery.

What happens if you have a surge while charging?

If any surges occur during your charging session, the electrical energy flows right to ground. Battery damage and other issues might prevail if there’s an improper ground or none at all.

Why does it matter which cable to connect to the charger?

Because there’s no power attached to the charger, it doesn’t matter which cables should be connected first. Be sure to match the red or positive cable to the battery’s positive terminal and vice versa. These connections do matter once the charger has power.

Can you take a motorcycle battery off before trickling charging?

Remove the Battery From the Bike. Your battery takes a charge from the motorcycle’s electrical system, so it would make sense to trickle charge in the same manner. Most experts agree that removing the battery before trickle charging is the safest scenario.

Can you use a trickle charger on a motorcycle?

How to Use a Trickle Charger on Your Motorcycle Battery. You may not ride your motorcycle every day – maybe it’s more of a leisure vehicle for the weekends. This luxury works well for you, but the motorcycle battery may not agree. Hopping onto your bike one day might result in a disappointing morning with no power.

Can a bike battery be damaged?

Although it’s a rare occurrence, any electrical surges produced during the charging period can damage associated components. Printed circuit boards and sensors in modern bikes are expensive to replace in these cases. Err on the side of caution, and remove the battery.

What type of charger is used to convert AC power to DC?

Trickle, or fully manual, chargers are the easiest type to use. These chargers take the AC power and convert it to DC. However, you will have to turn these charger off or else they will keep pumping energy into the charger. Float chargers are another common type of charger.

How to tell if a battery is fully charged?

A smart charger will tell you when the battery is fully charged. For other batteries, perform a voltage test. Disconnect the battery terminals from the charger. Then plug the battery leads into a DVOM, also known as a multimeter. Put the black lead into the COM slot, and the red lead into the V slot.

What type of charger is used to charge a battery?

Float chargers are another common type of charger. They provide a constant, gentle, current to the battery. Smart chargers monitor battery charge progress. This type of charger also minimizes damage to the battery as they stop charging when the battery is full.

How to charge a battery?

Connect the battery charger. Attach the charger to the battery terminals in any order. Make sure the battery terminals are properly connected to the charger. When properly connected, plug in the charger. The best and safest place to charge the battery is outside or in a well-ventilated area.

Why is the black clamp not connected to the battery?

The reason the black clamp is being connected to the frame and not the battery is because connecting it to the battery could destroy the battery.

What happens if your motorcycle doesn’t start?

Start your motorcycle. If your motorbike doesn’t work, the battery may be completely drained. However, if there’s any energy at all in it, the bike should start within the first few tries.

How to remove a motorcycle battery?

Generally, to remove a battery you must disconnect the negative cable first and then the positive cable. Then, release the battery from anything connecting it to the motorcycle body and lift it out of the bike. Removing the battery is a tricky operation. Read the manual before you do anything else.

What is a trickle charger?

The simplest type is a trickle charger, which converts the AC power coming out of your wall to DC, and blindly pumps it into your battery until it is turned off. Note that this type of charger must be monitored throughout the charging process.

Why do float chargers work?

Modern float chargers get a battery charged and then switch on and off automatically to keep the battery’s charge rate at the optimal charge level. (If you don’t have and use one of these, it’s probably a big part of why your battery is dead. A Battery Tender Junior is far cheaper than a new battery in most cases.

What is float charger?

Just sayin’.) On the left is a float charger, which has a circuit that monitors the battery’s state of charge. You may hear a standard charger referred to also as a "dumb" charger, because they don’t include an automatic desulfation mode.

Why is it important to remove a battery from a motorcycle?

Removing the battery is also a good idea because the temperature of a battery changes when being charged. A chemical reaction occurs inside the battery, and that reaction is exothermic — it gives off heat! The solution inside a battery can even boil and melt battery cases in extreme circumstances. The acid that bubbles out will wreak havoc on paint, metal, and rubber — nearly anything on a motorcycle can be damaged badly by sulfuric acid. If the battery is out of the bike and contained in a tray, your bike will stay nice even if the battery totally melts down during the charge process.

What kind of batteries can be charged?

Figure out what kind of battery you have. Lead acid, absorbed glass mat (AGM), and gel batteries can all be charged in the conventional way. Lithium-based batteries (lith ion, lith-iron, lithium phosphate, etc.) need special chargers depending on manufacturer, which brings us to the next step. Step 3.

What happens if you remove a bike battery?

A blown fuse, melted wiring harness, or fried ECU is not. One good electrical spike is all it takes to make that a reality. If the battery is out of the bike, it’s unaffected by blips on the electrical grid.

Can you charge a float charger while it’s in the bike?

In these instances, using the charging lead for your float charger while it’s in the bike is perfectly fine.

How Often Do You Need To Charge a Motorcycle Battery?

Keeping your motorcycle charged will come down to how often you use it. For those who ride on a daily or even weekly basis, your motorcycle’s battery should stay charged until its manufacturer-detailed lifespan ends.

What to do if your motorcycle doesn’t start?

If the engine doesn’t start, keep the other motorcycle running for a few more minutes and try again. Remove the clamps in reverse order; black clamp from the grounded surface, black clamp from the good battery’s negative post, red clamp from the dead battery, red clamp from the good battery. Depositphotos.

How long does it take for a rickle charger to charge?

In an effort to prevent overloading the dead battery, rickle chargers take a few hours to a full day to charge. Wait for the recommended period of time on the box. Remove the clamps in reverse order; black clamp from the grounded surface, red clamp from the dead battery, then start the motorcycle.

How to use a trickle charger on a motorcycle?

Using a trickle charger is similar to using a jump-starter, it just takes a little longer for the charge to rebuild. Remove the motorcycle’s seat to access the battery. Make sure your trickle-charger isn’t plugged into the outlet. Connect the red clamp to the positive post of the dead battery.

What to do if your motorcycle battery is dead?

If the dead-battery motorcycle doesn’t start after a few attempts, try reconnecting the battery cables, as they may just be loose.

How to avoid sparks on battery terminals?

Attaching cable clamps to the battery terminals in a single motion will avoid sparks.

What clamp to attach to motorcycle battery?

Attach the opposite red clamp to the live motorcycle’s battery’s positive terminal.

What is the Big Deal about Overcharging the Battery?

When a battery receives a greater charge than it is designed to handle the electrolytes inside the battery can reach a temperature high enough to allow them to come to a boil. The boiling electrolytes will cause the battery to overheat.

Why does my battery stop working?

In some cases, a battery that has reached this temperature can explode. Overheating your battery with a charger that is too big can cause your battery to stop working. It is not safe for your battery or for you.

How to charge a bike battery with a 2 amp charger?

To charge your battery using a two amp charger you need to find a safe place to connect the charger so that the bike and the charger will be protected during the time it takes to charge the battery completely.

What color is the battery charger cable?

The cable leads to a positive cable is often colored red so you do not connect the wrong polarity.

How long can you charge a 12 amp motorcycle battery?

So a person who has a twelve amp battery would use a two amp charger on their battery for no longer than six hours. Six hours at two amps per hour should create twelve amps. If you plan to use a two amp charger on your motorcycle battery find the amp hours your battery has, divide that number by two, and the resulting number is how long you can …

Can you use trickle chargers on motorcycle batteries?

A lot of people wonder if they can connect their motorcycle batteries to trickle chargers that produce two amps. The trickle chargers are designed to slowly charge a battery so most people rationalize that using this amount of a charge over an extended period of time to charge their battery will be safe.

Does it take longer to charge a battery?

Yes, it takes longer to provide a full charge to a battery at a lower amperage setting like two amps. The good side of this slow charging is that your battery will be less likely to be damaged during the charging process.

How many amps does a motorcycle battery need?

Most automotive chargers pump out 13 amps, 30 amps or even 50 amps. While technically you could use the automotive charger, if you don’t keep an eye on it or leave it unattended for an extended period of time, …

How to keep battery in top shape?

The best way to keep your battery in top shape is to use a smart charger like those offered by Battery Tender that have multiple steps in place to ensure the battery is properly charged and then continually monitors the battery to prevent undercharging/overcharging and loss of performance.

What is a trickle charger?

A trickle charger is constantly working and slowly trickling a small charge into the battery, even when it’s fully charged. A smart charger has a process of constantly monitoring the battery and ensuring the battery is always in prime form.

What to do if battery terminals don’t have rubber covers?

If your battery terminals don’t have those little rubber covers there are gels you can put on the terminals/posts to help prevent corrosion. Secure the battery in the battery compartment. A battery that moves around can lead to some major issues to the battery, battery terminals, or your electrical system.

How long do motorcycle batteries last?

Before we get into battery maintenance it should be noted the most motorcycle batteries typically last about three to four years-if properly cared for. Things like extreme hot or cold weather or letting your battery sit for a long period of time without proper maintenance can have an effect on the lifespan and overall health of your battery.

What is the charge current in absorption mode?

The Absorption Charge Mode is complete when the battery charge current drops below a very low value, usually below 1/8 ampere.

Why are lithium batteries so popular?

Lithium-ion batteries have become more popular because of their smaller size and weight savings. However, when it comes to charging not all batteries are the same. While you can charge/maintain lead acid batteries with trickle chargers and smart chargers.

What is a trickle charger?

A trickle charger, also sometimes referred to as a “Battery Tender” although that is actually just the most well known brand, is an item every motorcycle owner should have. Every time you park your bike in the garage, you should attach it to the trickle charger.

Do you need a trickle charger for a used bike?

This means that even if you’ve been out cruising on the highway at high RPMS, when you roll back into the garage, the battery may not be fully charged. All the more reason you need a trickle charger to top it up every time you come back.

Is an alternator better than a motorcycle?

Also generally the alternator is a lot better sized to properly charge it when it is used. At the end of the day, most people probably use their car a lot more than there motorcycle, giving it more chances to recharge.

Do motorcycles recharge their batteries?

Older and more budget friendly motorcycles often don’t do a great job recharging their batteries. While more and more newer feature correctly sized alternators on their bikes to support the accessory needs of the modern rider, many are still alternator deficient.

Can A Cold Winter Destroy A Motorcycle Battery?

There may be some of you who didn’t know that a motorcycle battery required maintenance throughout the winter and may have done nothing throughout the cold months.

What happens to a motorcycle battery in the winter?

What Happens To A Motorcycle Battery During The Winter. Just like us humans, harsh weather conditions can be rough on motorcycle batteries. Unfortunately, it is completely possible for a motorcycle battery to freeze. Cold temperatures can inhibit a motorcycle battery’s ability to start a motorcycle.

What is the difference between a trickle charger and a battery tender?

A trickle charger and a battery tender both charge motorcycle batteries, but a trickle charger is different because it gives a constant charge rather than turning on and off like a battery tender. If you use a trickle charger, you’ll need to supervise the charge to ensure it does not overcharge …

Why does my battery tender stop charging?

You essentially can let it do all the work without a worry. Some people worry that the battery tender itself may freeze in the cold temperatures and fail to charge the battery.

How to keep motorcycle battery charged in winter?

To keep a motorcycle battery charged during the winter, you can connect a battery tender to it indefinitely throughout the season, occasionally use a trickle charger while supervising it , or completely disconnect it and keep it inside a controlled temperature environment and charge it in the spring. Living in an environment that has harsh winters …

What is a battery tender?

A battery tender is a device you can hook up to your motorcycle battery indefinitely throughout the winter. It has a sensor on it that will notify the system that the battery is starting to lose it’s charge and will automatically start charging it.

Why does my motorcycle battery charge?

The battery gets a normal, routine charge every time you ride your motorcycle because of the stator. The battery is only used to start the motor cycle and the stator continues to charge the battery while the motorcycle is running

No Comments

how to travel with motorcycle

Uncategorized

, , , ,

How to Actually Travel the World on a MotorcycleFind a trustworthy rental company. You don’t just check a motorcycle with your suitcase (I asked). …Be reasonable about what you pack. Yes,you’re probably going to be traveling quite light. …Plan for the weather as best you can—but prepare for surprises. …Know how you’re going to feed yourself. …Succumb to local drinking customs. …And always be open to meeting new folks. …

What is the best motorcycle for long trips?

These Are The Best Motorcycles To Take On Long Road Trips2020 Harley-Davidson Electra Glide. Harley Davidsons never come short,and they definitely delivered with this badass motorcycle. …Honda Gold Wing. The 2020 Gold Wing is a whole lotta motorcycle,but it’s also way more agile and athletic than it looks.BMW R1250GS. …Kawasaki H2 SX SE. …Yamaha Star Venture Transcontinental. …Triumph Tiger Explorer. …More items…

What are the best touring motorcycles?

The 8 Best Touring MotorcyclesTriumph Tiger 1200. The Triumph Tiger 1200 is a powerful tourer that’s comfortable both on and off the road,making it a force to be reckoned with when it comes …BMW R 1250 GS. …KTM 1290 Super Duke GT. …Ducati Multistrada 1260. …Honda Gold Wing. …Harley Davidson Electra Glide. …Yamaha Venture Transcontinental. …Indian Roadmaster. …

How far can a motorcycle travel?

Most motorcycles come with a reserve tank and a switch that needs to be turned on to allow the reserve fuel to be use. It’s a good idea to know approximately how far your motorcycle will travel on reserve. Generally, it is only about 10 to 20 miles. So, when you switch to reserve, your first thought should be “find a gas station now!” Engine Size

Should I trade my car for a motorcycle?

You need to buckle down and pay that car off asap before you even think about getting a motorcycle. If you trade in the car, your upside down amount (6k or so atleast) will be tacked onto the price of whatever you buy and you’ll be hit even harder in monthly payments..

What to bring to a riding trip?

For instance, bring a rain shield that fits on top of your riding jacket, long johns for the cold, a pair of thin gloves that fit under your riding gloves, etc. Heated layers are also an option to consider bringing along if you’re braving a colder climate.

What is the most valuable piece of equipment you own?

Your helmet is likely to be the most precious and expensive piece of equipment you own. The thought of it getting banged around in your suitcase while loading and unloading the plane probably makes you a bit nervous. Here’s a pro tip: bring it on the plane with you.

What do you decide when planning a riding trip?

As you plan your riding trip, you will determine along the way whether you’ll do things road-trip style (different city every night) or remain in the same hub and leave every day on a new adventure. Once you’ve made that decision, you’ll have to pack accordingly.

Can you take a helmet on a plane?

Your helmet is likely to be the most precious and expensive piece of equipment you own. The thought of it getting banged around in your suitcase while loading and unloading the plane probably makes you a bit nervous. Here’s a pro tip: bring it on the plane with you. As previously stated, most companies allow you a piece of carry-on and a personal bag (eg: a backpack and a laptop bag). Take full advantage of it and take your lid in the cabin with you.

Can you carry a sandbag in a carry-on?

You can either carry it in its pouch or safely pack it in a carry-on bag (duffle bag, backpack, etc.) to have space to store other personal effects and have all your precious and important gear and documents with you at all time.

Can you travel with a bike bag?

If the bag has to travel with you on the bike, look into getting a soft piece of luggage that can easily be strapped to a motorcycle with straps or a net. If you’re visiting family or staying in the same place for the duration of your stay, then you can allow yourself to pack a bulkier, wheel-mounted suitcase.

Is it better to wear layers or travel weather specific?

Considering how bulky gear is, traveling weather-specific gear is ludicrous. Think about bringing layers that will allow you to easily adapt to the temperature and to the weather instead without having to travel with a specific piece of clothing for each scenario. It will save you space and you will find layers more versatile than dedicated gear.

What is sport touring?

Sport-touring is a great way to follow the pavement to your favorite motorcycle destinations. Bikes like the Kawasaki Concours, Yamaha FJ1300, and Honda ST have opened up a world of exploring coastlines and backcountry byways across the country. Adventure-touring is the next step in the pecking order. The ADV bikes are designed to go hundreds of miles either on or off the highway. Some are geared more toward street; others are built for the dirt. Either way they feature an upright riding position like you would get from a dirt bike and most have aftermarket crash bars and tough luggage to keep your gear safe.

How to pack a motorcycle?

Packing your motorcycle is a big deal. You only have a finite amount of space available and it is dictated by your luggage and the size of your motorcycle. It is imperative to know the load range of your bike and tires and go through great lengths to avoid overloading your machine. Some people even pull a motorcycle travel trailer like the Mini Mate or Kompact Kamp unit behind their big bikes these days. Anyway, when you are packing, think about the least amount of gear you need, lay it all out, then remove a quarter of it. When it comes to packing for a motorcycle trip, less is more and if you plan to go to events, bring a backpack so that you can haul a little bit of extra stuff on the way back home.

What are motorcycle bags?

Saddlebags are the most common and are fixed to both sides of the back of the bike alongside the passenger seat. They usually allow you to take a passenger without getting in the way. They are available in hard or soft designs, both of which have benefits over the other. A tank bag rests on top of the tank and is ideal for the various sundries a rider wants close at hand. Phones, GPS, wallet, snacks, personal protection, bike locks, and stuff like that are easy to access from a tank bag. A tail bag is where you would store your bigger bulky items like clothes, camping gear, and things of that nature for which you don’t need easy access.

What is the most important thing to have when riding a motorcycle?

Motorcycle gear is last but arguably the most important of all things on this list. You will want the most comfortable gear you can afford. Your helmet should be a quality lid with a good, undamaged visor. If you only have one, make it a clear visor. If you can bring two, have a tinted and clear and take the time to swap them out at sundown. Your motorcycle riding jacket, pants, boots, and gloves should suit the climate and terrain you are riding in.

What to look for when planning a cross country motorcycle trip?

When you are putting together your cross-country motorcycle trip make sure to look for motorcycle events like rallies, races, and consumer shows taking place along your route and plan to attend it if you have time. Some of the best motorcycle destinations will have events going on throughout the year and you can make the best of your motorcycle trip by incorporating it into the plan.

What are some good places to visit on a motorcycle trip?

Other great motorcycle road trip ideas include touring national parks like the Grand Canyon, visiting historical points of interest like Kitty Hawk or Gettysburg, or just seeing family and friends who you haven’t seen in a while. When you are putting your route together try to take advantage of the roads less traveled, the byways that connect to the main interstate so you can get away from the main flow of traffic and enjoy the scenery.

What is a tank bag?

A tank bag rests on top of the tank and is ideal for the various sundries a rider wants close at hand. Phones, GPS, wallet, snacks, personal protection, bike locks, and stuff like that are easy to access from a tank bag.

Can you rent a motorcycle with a suitcase?

You don’t just check a motorcycle with your suitcase (I asked). Many U.S.-based rental companies can recommend an international source, then go for the best available. According to Yardeny, that can range from an old 125cc bike (for beginners) to a brand-new BMW 1200cc. “The most difficult place to rent was in New Delhi,” Yardeny notes, “where we got swindled by a company that came up first in Google search results”—so you’ll want to check everything out very thoroughly.

Can you travel with a suitcase on a motorcycle?

Yes, you’re probably going to be traveling quite light. “You cannot air travel with a hard suitcase when traveling to a motorcycle trip unless you have a place to store it, as it won’t fit on the bike,” he says. “The bike has two side cases (approximately 29 or 30 liters), as well as a top case (30 liters).”

Can you stop in Vietnam?

Either you’ll be able to stop, or there won’t be a bi te available for miles . “In Vietnam, there are little eateries in the villages, so you just stop for coffee and a bite when you want,” he says. “In the Alps, it was more like going to a supermarket in the morning and packing lunch. You can always bungee some food and water on top of the case.”

Who is Binh the Berliner?

Riding with him is always an educational experience; he stops often to point out details of how stuff is collected, made, cooked, and distilled. He is the one who thought me how the locals in Vietnam make the rice spirit. He is called ‘the Berliner’ because back before the wall fell in Germany, he was sent there by the communists to learn.” They now keep in touch through Facebook.

How to secure a motorcycle?

Use the tow straps to secure the motorcycle down snugly. You may need to get creative with where you fasten the two straps since most vans don’t come equipped with hooks for straps like this. Once the motorcycle is secure, you can place some cardboard underneath it to prevent leaks from running all over.

What is a tow dolly?

A tow dolly is a strong piece of metal construction that attaches to the hitch of a car. It connects to the front of a motorcycle tire and secures it to the back of a car. This will leave the back tire on the road so your car doesn’t have to carry the whole weight of the motorcycle.

What is a motorcycle carrier?

A motorcycle carrier is a device that also connects to the hitch of your truck or SUV. It’s a ramp that you place the motorcycle on top of so the motorcycle is towed sideways on the back of your car. These are fairly easy to use and have proven to be an excellent way to transport a motorcycle.

How much does a tow dolly weigh?

It does have specs you’ll need to pay attention too. The max load a tow dolly can haul is 800 pounds (this is the weight of the whole motorcycle even though it’s just connected to the front tire). But the average motorcycle usually weighs around 400 pounds, so most people should be fine using this method.

How much weight can a motorcycle carry?

The max amount of weight these can carry is 500 pounds. Again, the average motorcycle weighs about 400 pounds so most people should be fine using this method.

How to keep a motorcycle from leaking in a van?

Before you place the motorcycle in the van, make sure the gas tank is completely empty. This will prevent gas from sloshing around, leaking, and emitting fumes that could be harmful for everyone inside the vehicle. Next you’ll want to place a tarp on the floor of the van to keep it from getting dirty.

What is the best thing about a tow dolly?

One of the nice things about having a tow dolly is it’s size. It’s something small enough that you can store in the corner of your garage with really no disturbance from it at all. That’s a lot better than having to store a trailer.

How do bikers learn to tour?

A biker learns to tour by experience, usually by trial and error. Some of us prefer to travel alone; others in packs. On a solo ride, you quickly learn what is necessary and what is purely a luxury. Such rides help you find out who you are at the end of the day. The other end of the touring spectrum is the group ride.

Why do people ride bikes?

But most enthusiasts come to find a specific reason to hit the road: to explore, hang with friends, fall in love, sightsee, travel to rallies, or seek out the perfect twisty.

Is it bad to ride with strangers?

While you may make a life long riding buddy, you may also have the most miserable ride of your life. On the other hand, if you are new to touring, it might not be so bad.

Can you handle a group ride?

Some people cannot handle the group ride. It moves a lot slower than the solo journey, although there is plenty of company. Also remember, as with any trip, to choose your mates with care. One bad apple generally ruins a journey. Companies that offer commercial tours present this problem.

How to get blunt impact weapons on a plane?

So how do you get it on a plane? You carry it with you as your personal item. Just throw it in a helmet bag (Bell makes the best ones, they come with any new helmet purchase) and tell anyone who asks that it’s your murse. Airport security apparently isn’t aware that these things make excellent blunt impact weapons; I’ve only been hassled once, in Heathrow, immediately following a terrorist attack in that country. It’s never once raised an eyebrow elsewhere and even makes a great conversation starter if you happen to sit next to a pretty girl…or guy. Just keep in mind that it likely won’t fit under your seat and needs to go in the overhead.

What to do when picking a duffel?

When picking a duffel to use, layout your gear to get an idea of volume then buy a duffel that size, not larger. A duffel that is completely full is fairly rigid, but if there is empty space is gets quit floppy. If it isn’t quite rigid enough when you are packed or you are still a bit concerned about damage, you can always cut some pieces of cardboard that are the same length and width of the duffel, then slide them in around the outside.

What is the meaning of "back up"?

Making statements based on opinion; back them up with references or personal experience.

What to do if you have a leather suit on a plane?

A final tip: if you have a two-piece leather suit, wear the jacket on the flight, and pack the bottoms in the bag. Just remember to remove your back protector since it’ll be uncomfortable during the flight.

Where to pack a helmet?

You can pack your helmet in the middle surrounded by other pieces of your riding clothes. Stuff some street clothes or tshirts, etc inside the helmet, then wrap it with your riding jacket and place it with other clothing on top and below in the middle of the duffel.

Can you put leather gloves in a duffel bag?

The rest of the gear can safely go in the duffel bag. The leather suit, armour, boots, and gloves are unlikely to be considered as dangerous/prohibited items. The only issue you might have is if your gear contains metal padding/plates. These are becoming more and more common on both gloves and leathers, and might raise an eyebrow or two.

Can you pack your gear in a cardboard box?

You can pack your gear in a cardboard shipping carton and check that. Call the airport to see if there are any special requirements for checking such packages.

No Comments