how to change gear oil on motorcycle
How to Change Your Motorcycle Oil: A Step-by-Step GuideSafety First You can never be too careful when working on your motorcycle at home. …Warm the Engine Experts recommend changing the oil when the engine is warm but not too warm. …Drain the Oil Once the oil is warm,put the drain pan underneath the oil drain plug and use the proper wrench to open it. …
How to change motorcycle oil?
To begin the process for how to change motorcycle oil is to unscrew the engine’s oil cap. Do not remove in a hurry, as this would result in oil spillage. Make sure your bike stays immobile to change the oil in ease. Turn on the bike and let it warm up for about 5-10 minutes. This helps to drain the oil when it is hot enough to remove the old oil.
How to remove an oil filter from a motorcycle engine?
If it is hard to remove, try using a rubber mallet on the socket handle. Remove the oil filter by hand. If your bike comes with the kind that has a nut head on it, the removal should be easier. Now that you have the drain bolt and the filter off, let all the oil from the engine drain out.
Can you use gear oil on a motorcycle chain?
Yes, you can use gear oil on a motorcycle chain depending upon its type and condition. Which Oil is Best for Motorcycle Chain? How do you Lubricate a Motorcycle Chain with Gear Oil?
How often should you change your motorcycle gearbox oil?
The more you use your bike, the quicker action needs to be taken for changing your gearbox oil. However, if you don’t use your bike more often, dirt particles may get clogged with your oil and will require an immediate change of gear oil.
Why do you need to change gear oil on a motorcycle?
If your motorcycle uses gear oil, it’s important to change it regularly to protect your transmission. Our easy guide explains how to change your gear oil safely.
Where is the oil drain plug on a bike?
Then locate the oil drain plug, which is underneath the bike and between the shock absorbers, then place your oil drain tray underneath.
Do motorcycles need oil changes?
These bikes are most commonly of a ‘pre-unit’ construction, meaning that their transmissions also need regular oil changes.
How long should I let my bike run before draining engine oil?
The very first thing you should do before draining the engine oil is warm up your bike, I tend to put my bike on the main stand and let it run for about five minutes to warm up the oil.
Do drain plugs seal against oil pans?
First things first your drain plug has some way of sealing against the oil pan, some of you may have crushed washers or perhaps like a fiber washer sealing your plug and your pan . In the case of our Harley, you may have a sealing o-ring.
Do you need to spin the filter off a bike?
For those of you who are working on a bike with an external filter, you’re going to need to spin the filter off , sometimes that can be pretty difficult as we had mentioned earlier.
Do street glides have oil drains?
Some bikes have a number of plugs underneath, the Street Glide has a transmission oil drain plug, there’s also off to the side a primary oil plug.
Step 1: Materials Needed
Here we have a photo of materials needed for our oil change. One very important piece of equipment is a rear paddock stand. These can be had fairly cheap at a local motorcycle accessory store. I picked mine up for about $40. If your bike comes equipped with a center stand then you wont be needing the rear paddock stand.
Step 2: Oil Cap
Then unscrew your engine’s oil cap so that air can pass through the engine. This way, the oil can drain out properly from your engines oil drain hole.
Step 3: Warm Up
Turn on the bike and let it warm up for several minutes so that the oil is warm. This helps the flow of the oil when draining.
Step 4: Drain Bolt Removal
To remove the drain bolt, simply use your socket wrench. If it is hard to remove, try using a rubber mallet on the socket handle.
Step 5: Oil Filter
Remove the oil filter by hand. If your bike comes with the kind that has a nut head on it, the removal should be easier.
Step 6: Sit and Wait
Now that you have the drain bolt and the filter off, let all the oil from the engine drain out. Use paper towels on parts where some of the oil may leak onto. In this case, some was leaking on the headers.
Step 7: Oil Filter Install
Dip your finger into the new oil container and rub some onto the new oil filter’s o-ring. This will ensure a nice seal when installing the new oil filter.
Fortunately, the new filter came equipped with a nut head. The same wrench I used on the drain bolt also works on the filter.
Why do you need a paddock stand for a motorcycle?
If your motorcycle comes with a kickstand, you might want to consider buying a paddock stand, which allows riders to perform routine maintenance, such as oil changes, easily. Paddock stands allow oil to drain properly, which it won’t if you use the kickstand to prop the bike up because it will be at an angle.
How long does it take for oil to drain into sump?
Give the oil five minutes to drain into the sump, check the level by using a dipstick or looking at the inspection window. Add the remaining amount of oil slowly, periodically checking the level each time you add more. This is done to ensure you don’t overfill the engine.
What to do when you buy new oil?
While you’re out purchasing new oil, make sure you pick up a new oil filter, in addition to a tray that you’ll use to drain the oil into, gloves, and a long-necked funnel. The gloves are optional and are used to avoid skin irritation that can occur from contact with oil.
How to get a good seal on an oil filter?
The O-ring creates an excellent seal for the oil filter, however, you don’t want to overtighten it. Take some oil and rub it around the filter’s seal, then you can hand-tighten it and use the oil wrench to give it a small turn. This will be enough to get a strong seal but will keep it loose enough that even if the filter’s in a tight spot it will really easy to take it out the next time.
How to clean oil from a car?
First, run the engine for a couple of minutes to warm up the oil. Warm oil tends to drain more easily. After a few minutes have passed , unscrew the oil filler cap and take it off , setting it aside. The next step is removing the old oil. To do this, you’ll remove the drain bolt with the help of a socket wrench. Place the drain bolt near the filler cap so you can keep all the pieces organized and accessible.
What is crush washer?
With most tanks, once the oil drain bolt has been loosened, you’ll find a crush washer or O-ring, which is designed to create a tight seal between the crankcase and the plus. Make sure you don’t lose one of these pieces. Unfortunately, they’re very easy to forget to replace or lose.
What to do before touching a bike?
Before you think of even touching your bike, make sure that you purchase the right type of oil. If you’re not sure what type of oil your bike uses, you can speak with a local mechanic or contact the bike’s manufacturer.
Why do you need to change your oil on a motorcycle?
How often you ride depends on the amount of dirt and gunk building up in your internal components. Motorcycle oil change requires care to avoid fuel combustion of the internal components of your bike.
How to remove drain bolt on bike?
Then remove the drain bolt by using the socket wrench. If you have trouble removing it, use a rubber mallet on the socket handle. After you have done that, use a metal tray underneath the bike to drain out the oil.
How do I install an oil filter?
To install the new oil, use your finger and dip the new oil onto the new oil filter’s O-ring. This will help to ensure a nice seal when installing the new oil filter. Most oil filters have equipped with a nut head. If you have trouble removing the filter by hand, use the socket wrench again to remove the old filter. Install the new oil filter by turning anti-clockwise.
How to avoid collapsing when changing oil on a bike?
When waiting for the oil to drain completely, make sure you put the excess oil on one side to avoid slipping and spillage. Before you apply the new oil, make sure the new oil filter is clean and free from other oil contaminants.
What happens if you don’t change your motorcycle oil?
If you do not check or change your oil regularly, this would cause the oil to become inefficient. This can also cause the oil to wear out after long duration if not changed or check regularly. The wearing off the oil worsens the condition of the motorcycle oil. To avoid this happening is to check and change the.
How long does it take for motorcycle oil to drain?
This helps to drain the oil when it is hot enough to remove the old oil. The warmer the oil, the easier it is to drain the oil from your motorcycle. Do take care to handle the warm oil, never touch the warm oil!
Why is it important to check your oil?
Checking your oil is important to keep the fuel and engine running smoothly throughout the ride. Not maintaining the engine of your motorcycle would result in unexpected fuel combustion and inefficiency. Oil change for motorcycles requires attention in keeping the internal components for longer. How often to change oil on motorcycle depends on …
