How to change motorcycle oil1. Clean your work area Before you start,make sure the oil-change area is clean and free of dirt and other contaminants.2. Access the drain plug and oil filter …3. Drain the oil …4. Remove the oil filter …5. Install a new oil filter …6. Reinstall the drain plug …7. Add new motorcycle oil …8. Run the engine and check for leaks …More items
How to give your motorcycle an oil change?
New oil: use the manual to your motorcycle to ensure you use the right motor oil for your needsRear standFunnelRagsGlovesSafety gogglesWrench set,torque wrench,and a strap wrenchDrain panNew oil filter
How do I change my oil on my motorcycle?
The Tools You’ll NeedOil filter removal toolOil filter cap removal tool (if your bike comes with one,BMW for example)3/8″ square drive ratchet /socket wrench10mm 13mm sockets8mm Allen key or Allen socketOil funnelOil drain container for old oil (old washing up bowls are excellent)Paper towels and or cloth ragsDon’t forget the engine oil (usually around 4 litres)
How to change your own motor oil?
Steps for changing your oilCheck the type and amount of oil neededGet together your filter,wrenches,and other suppliesPrepare your vehicleLocate the oil filter and drain plugDrain the oilTighten the drain plugChange the oil filterAdd the new oilCheck the oil level
How to change the oil in motorcycle forks?
Ensure the fork is standing vertically on a level surface. Pour in the amount of oil recommended by the manufacturer. …Now,refer to the second measurement which will say how far from the top of the fork the oil should sit. …Top up the oil and then pull on the syringe again. …
Why do you need a paddock stand for a motorcycle?
If your motorcycle comes with a kickstand, you might want to consider buying a paddock stand, which allows riders to perform routine maintenance, such as oil changes, easily. Paddock stands allow oil to drain properly, which it won’t if you use the kickstand to prop the bike up because it will be at an angle.
How long does it take for oil to drain into sump?
Give the oil five minutes to drain into the sump, check the level by using a dipstick or looking at the inspection window. Add the remaining amount of oil slowly, periodically checking the level each time you add more. This is done to ensure you don’t overfill the engine.
What to do when you buy new oil?
While you’re out purchasing new oil, make sure you pick up a new oil filter, in addition to a tray that you’ll use to drain the oil into, gloves, and a long-necked funnel. The gloves are optional and are used to avoid skin irritation that can occur from contact with oil.
How to get a good seal on an oil filter?
The O-ring creates an excellent seal for the oil filter, however, you don’t want to overtighten it. Take some oil and rub it around the filter’s seal, then you can hand-tighten it and use the oil wrench to give it a small turn. This will be enough to get a strong seal but will keep it loose enough that even if the filter’s in a tight spot it will really easy to take it out the next time.
How to clean oil from a car?
First, run the engine for a couple of minutes to warm up the oil. Warm oil tends to drain more easily. After a few minutes have passed , unscrew the oil filler cap and take it off , setting it aside. The next step is removing the old oil. To do this, you’ll remove the drain bolt with the help of a socket wrench. Place the drain bolt near the filler cap so you can keep all the pieces organized and accessible.
What is crush washer?
With most tanks, once the oil drain bolt has been loosened, you’ll find a crush washer or O-ring, which is designed to create a tight seal between the crankcase and the plus. Make sure you don’t lose one of these pieces. Unfortunately, they’re very easy to forget to replace or lose.
What to do before touching a bike?
Before you think of even touching your bike, make sure that you purchase the right type of oil. If you’re not sure what type of oil your bike uses, you can speak with a local mechanic or contact the bike’s manufacturer.
Step 1: Materials Needed
Here we have a photo of materials needed for our oil change. One very important piece of equipment is a rear paddock stand. These can be had fairly cheap at a local motorcycle accessory store. I picked mine up for about $40. If your bike comes equipped with a center stand then you wont be needing the rear paddock stand.
Step 2: Oil Cap
Then unscrew your engine’s oil cap so that air can pass through the engine. This way, the oil can drain out properly from your engines oil drain hole.
Step 3: Warm Up
Turn on the bike and let it warm up for several minutes so that the oil is warm. This helps the flow of the oil when draining.
Step 4: Drain Bolt Removal
To remove the drain bolt, simply use your socket wrench. If it is hard to remove, try using a rubber mallet on the socket handle.
Step 5: Oil Filter
Remove the oil filter by hand. If your bike comes with the kind that has a nut head on it, the removal should be easier.
Step 6: Sit and Wait
Now that you have the drain bolt and the filter off, let all the oil from the engine drain out. Use paper towels on parts where some of the oil may leak onto. In this case, some was leaking on the headers.
Step 7: Oil Filter Install
Dip your finger into the new oil container and rub some onto the new oil filter’s o-ring. This will ensure a nice seal when installing the new oil filter.
Fortunately, the new filter came equipped with a nut head. The same wrench I used on the drain bolt also works on the filter.
How to drain fluid from a bike?
Warm up that oil. It’s easiest to drain the fluid from your bike if it’s been warmed up a bit. This is easily accomplished by taking a quick ride around the block or to the store for a Snickers bar — a reward later for a job well done. You can also just let the bike idle for a few minutes, though you’ll have to have the Snickers on hand. Just be careful to steer clear of the exhaust and other hot metal parts when you reach under the bike to grab that oil plug.
What is the owner’s manual on a motorcycle?
Owner’s manual. The owner’s manual for your particular motorcycle is your first point of reference. If you’re like me and tend to prefer older motorcycles that have lived full, rich lives, chances are the owner’s manual was lost long ago to garage rats or a loose glovebox door.
How to safely ride a bike?
Before you get down on the ground next to your bike: 1 Make sure it is secure on the center stand, paddock stand, or lift and not just on the side stand. 2 We recommend eye protection, as well as proper clothing and footwear. 3 Be careful not to attempt this if you’ve just come back from a long ride; the oil and the underside of the bike are likely hot and could cause serious burns. 4 Make sure you’re safely away from moving cars and motorcycles, as you’ll probably be sitting or lying on the ground to perform this job.
How to become familiar with a motorcycle?
The best way to become familiar with your two-wheeler — besides by riding and enjoying the hell out of it — is by performing your own maintenance, and that includes changing the case oil. Jonathon Klein.
What is riding a motorcycle?
Whether that’s admiring the lush Ponderosa pines and herds of mule deer on your way to the Grand Canyon or trying not to get squished between a wayward Toyota Prius and a Ford F-150 Raptor on the steaming-hot 405 freeway in Los Angeles, you’re exposed in the best, and worst, way possible to nature.
How often should I change the oil on my 2013 Ducati?
For my 2013 Ducati 848 — less than 10 years old is a brand-new bike, as far as I’m concerned — Ducati advises changing the oil every 7,500 miles, although riders I’ve spoken with believe it’s better to clear out the old stuff every 2,500 miles or so. What I’m trying to say is, the interval of changing your motorcycle’s engine or case oil will vary depending on make, model, and year it was produced. You can consult your bike’s manual, check with the manufacturer’s part’s department, or talk to your club friends to determine the best schedule.
What is case oil?
We’re talking about the engine or case oil, which lubricates the moving parts inside your engine and decreases friction while also helping to cool your engine and keep those internals from getting rusty. The oil can also wash debris from your engine parts down to the bottom of the case where it can be flushed from the system when you change your oil, i.e. metal shavings or particulates that shed during normal operation or during part failure.
Why do you need to change your oil on a motorcycle?
How often you ride depends on the amount of dirt and gunk building up in your internal components. Motorcycle oil change requires care to avoid fuel combustion of the internal components of your bike.
How to remove drain bolt on bike?
Then remove the drain bolt by using the socket wrench. If you have trouble removing it, use a rubber mallet on the socket handle. After you have done that, use a metal tray underneath the bike to drain out the oil.
How do I install an oil filter?
To install the new oil, use your finger and dip the new oil onto the new oil filter’s O-ring. This will help to ensure a nice seal when installing the new oil filter. Most oil filters have equipped with a nut head. If you have trouble removing the filter by hand, use the socket wrench again to remove the old filter. Install the new oil filter by turning anti-clockwise.
How to avoid collapsing when changing oil on a bike?
When waiting for the oil to drain completely, make sure you put the excess oil on one side to avoid slipping and spillage. Before you apply the new oil, make sure the new oil filter is clean and free from other oil contaminants.
What happens if you don’t change your motorcycle oil?
If you do not check or change your oil regularly, this would cause the oil to become inefficient. This can also cause the oil to wear out after long duration if not changed or check regularly. The wearing off the oil worsens the condition of the motorcycle oil. To avoid this happening is to check and change the.
How long does it take for motorcycle oil to drain?
This helps to drain the oil when it is hot enough to remove the old oil. The warmer the oil, the easier it is to drain the oil from your motorcycle. Do take care to handle the warm oil, never touch the warm oil!
Why is it important to check your oil?
Checking your oil is important to keep the fuel and engine running smoothly throughout the ride. Not maintaining the engine of your motorcycle would result in unexpected fuel combustion and inefficiency. Oil change for motorcycles requires attention in keeping the internal components for longer. How often to change oil on motorcycle depends on …
Step 1: Warm Up Your Engine
It’s much easier to change your oil when your engine is a little warm, so plan to get started after the engine has been running.
Step 2: Clean Up
Set your bike up on a stand so it stays steady while you work. Then, take a rag and wipe down the engine area around the oil filter and drain plug.
Step 3: Drain Old Oil
Place the drain pan under the drain plug, and crack open the plug. Hold your arm so you don’t spill oil all over yourself, and unscrew the plug by hand. Wait until all the oil has drained into the drain pan.
Step 4: Remove Old Filter
Once the flow of oil has stopped, you can change the filter. Use the strap wrench (another option is an oil filter wrench) to loosen the filter until you can unscrew it by hand. Pour the oil in the filter into the drain pan.
Step 5: Install New Filter
Apply a little oil from the drain pan to the O-ring on your new filter. The oil helps the filter slip smoothly into place and ensures a good seal. Also add a little oil directly into the filter so your engine doesn’t run dry when you start it.
Step 6: Replace Sealing Washer
Wipe off the drain plug, and inspect the sealing washer. Most owners’ manuals will tell you to replace the sealing washer every time you change the oil, but this isn’t always necessary.
Step 7: Install Drain Plug
Put the drain plug back into place by hand. Snugging bolts in by hand first is important because you will avoid cross-threading, which damages the threads. Once it’s snug, tighten the plug with your wrench.
How long should I let my bike run before draining engine oil?
The very first thing you should do before draining the engine oil is warm up your bike, I tend to put my bike on the main stand and let it run for about five minutes to warm up the oil.
Do drain plugs seal against oil pans?
First things first your drain plug has some way of sealing against the oil pan, some of you may have crushed washers or perhaps like a fiber washer sealing your plug and your pan . In the case of our Harley, you may have a sealing o-ring.
Do you need to spin the filter off a bike?
For those of you who are working on a bike with an external filter, you’re going to need to spin the filter off , sometimes that can be pretty difficult as we had mentioned earlier.
Do street glides have oil drains?
Some bikes have a number of plugs underneath, the Street Glide has a transmission oil drain plug, there’s also off to the side a primary oil plug.